IDS peak 2.15.0 / uEye+ firmware 3.54

Enables or disables the limits for BrightnessAutoExposureTimeMin and BrightnessAutoExposureTimeMax. When ExposureAuto is active, the exposure time can vary within these limits.

Values description

•Off: Disables BrightnessAutoExposureTimeMin and BrightnessAutoExposureTimeMax.
The range of the exposure time is only limited by sensor properties and AcquisitionFrameRate.

•On: Enables BrightnessAutoExposureTimeMin and BrightnessAutoExposureTimeMax.
The range of the exposure time is limited by BrightnessAutoExposureTimeMin and BrightnessAutoExposureTimeMax.

Code example

C++

// Determine the current entry of BrightnessAutoExposureTimeLimitMode
std::string value = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("BrightnessAutoExposureTimeLimitMode")->CurrentEntry()->SymbolicValue();
// Get a list of all available entries of BrightnessAutoExposureTimeLimitMode
auto allEntries = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("BrightnessAutoExposureTimeLimitMode")->Entries();
std::vector<std::shared_ptr<peak::core::nodes::EnumerationEntryNode>> availableEntries;
for(const auto & entry : allEntries)
{
  if ((entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotAvailable)
          && (entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotImplemented))
  {
      availableEntries.emplace_back(entry);
  }
}
// Set BrightnessAutoExposureTimeLimitMode to "On"
nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("BrightnessAutoExposureTimeLimitMode")->SetCurrentEntry("On");

C#

// Determine the current entry of BrightnessAutoExposureTimeLimitMode
string value = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("BrightnessAutoExposureTimeLimitMode").CurrentEntry().SymbolicValue();
// Get a list of all available entries of BrightnessAutoExposureTimeLimitMode
allEntries = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("BrightnessAutoExposureTimeLimitMode").Entries();
List<string> availableEntries = new List<string>();
for(int i = 0; i < allEntries.Count(); ++i)
{
  if ((allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotAvailable)
          && (allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotImplemented))
  {
      availableEntries.Add(allEntries[i].SymbolicValue());
  }
}
// Set BrightnessAutoExposureTimeLimitMode to "On"
nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("BrightnessAutoExposureTimeLimitMode").SetCurrentEntry("On");

Python

# Determine the current entry of BrightnessAutoExposureTimeLimitMode (str)
value = nodeMapRemoteDevice.FindNode("BrightnessAutoExposureTimeLimitMode").CurrentEntry().SymbolicValue()
# Get a list of all available entries of BrightnessAutoExposureTimeLimitMode
allEntries = nodeMapRemoteDevice.FindNode("BrightnessAutoExposureTimeLimitMode").Entries()
availableEntries = []
for entry in allEntries:
  if (entry.AccessStatus() != ids_peak.NodeAccessStatus_NotAvailable
          and entry.AccessStatus() != ids_peak.NodeAccessStatus_NotImplemented):
      availableEntries.append(entry.SymbolicValue())
 
# Set BrightnessAutoExposureTimeLimitMode to "On" (str)
nodeMapRemoteDevice.FindNode("BrightnessAutoExposureTimeLimitMode").SetCurrentEntry("On")