Controls if the sequencer configuration mode is active.
Name |
SequencerConfigurationMode |
Category |
|
Interface |
Enumeration |
Access |
Read/Write |
Unit |
- |
Visibility |
Expert |
Values |
Off On |
Standard |
SFNC |
Availability uEye+ |
|
Availability uEye |
- |
Values description
•Off: Disables the sequencer configuration mode.
•On: Enables the sequencer configuration mode.
|
Note the following points if you want to enable the SequencerConfigurationMode: •SequencerMode = "Off" •ExposureAuto = "Off" •TriggerSelector is not "ExposureEnd" |
Code example
C++
// Determine the current entry of SequencerConfigurationMode
std::string value = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("SequencerConfigurationMode")->CurrentEntry()->SymbolicValue();
// Get a list of all available entries of SequencerConfigurationMode
auto allEntries = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("SequencerConfigurationMode")->Entries();
std::vector<std::shared_ptr<peak::core::nodes::EnumerationEntryNode>> availableEntries;
for(const auto & entry : allEntries)
{
if ((entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotAvailable)
&& (entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotImplemented))
{
availableEntries.emplace_back(entry);
}
}
// Set SequencerConfigurationMode to "Off"
nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("SequencerConfigurationMode")->SetCurrentEntry("Off");
C#
// Determine the current entry of SequencerConfigurationMode
string value = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("SequencerConfigurationMode").CurrentEntry().SymbolicValue();
// Get a list of all available entries of SequencerConfigurationMode
allEntries = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("SequencerConfigurationMode").Entries();
List<string> availableEntries = new List<string>();
for(int i = 0; i < allEntries.Count(); ++i)
{
if ((allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotAvailable)
&& (allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotImplemented))
{
availableEntries.Add(allEntries[i].SymbolicValue());
}
}
// Set SequencerConfigurationMode to "Off"
nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("SequencerConfigurationMode").SetCurrentEntry("Off");
Python
# Determine the current entry of SequencerConfigurationMode (str)
value = nodeMapRemoteDevice.FindNode("SequencerConfigurationMode").CurrentEntry().SymbolicValue()
# Get a list of all available entries of SequencerConfigurationMode
allEntries = nodeMapRemoteDevice.FindNode("SequencerConfigurationMode").Entries()
availableEntries = []
for entry in allEntries:
if (entry.AccessStatus() != ids_peak.NodeAccessStatus_NotAvailable
and entry.AccessStatus() != ids_peak.NodeAccessStatus_NotImplemented):
availableEntries.append(entry.SymbolicValue())
# Set SequencerConfigurationMode to "Off" (str)
nodeMapRemoteDevice.FindNode("SequencerConfigurationMode").SetCurrentEntry("Off")
