|
USB cables with non-standard connectors must be connected to the camera first and then to the PC. Otherwise the camera might not be recognized correctly. |
9-pin micro D-Sub socket (MPE Garry 11-0021-50-09L)
Pin |
Description |
 Fig. 546: USB uEye SE - Micro D-Sub socket male, camera rear view |
|---|---|---|
1 |
Flash output with optocoupler (-) |
|
2 |
Trigger input with optocoupler (+) |
|
3 |
Shielding |
|
4 |
USB power supply (VCC) 5 V |
|
5 |
USB ground (GND) |
|
6 |
Flash output with optocoupler (+) |
|
7 |
Trigger input with optocoupler (-) |
|
8 |
USB data (+) |
|
9 |
USB data (-) |
The color assignment of the used I/O cable is specified in the data sheet of the cable. For I/O cables from IDS Imaging Development Systems GmbH, you can find the data sheet on the website. Select the specific I/O cable in the download area and view the associated data sheet.
 |
The maximum length of the I/O cable is 30 m. The cable must be shielded. |
