USD 53.37
16-point sinking transistor PLC output module; 12–24 VDC, 0.5 A/point, screw terminal, DIN-rail mount.
CJ-series basic transistor output unit with 16 sinking outputs for 12 to 24 VDC control circuits. Official OMRON documentation identifies it as a terminal-block output unit for CJ I/O Bus systems, with screw-terminal wiring, 0.5 A per point, and a total 5.0 A per unit current rating. It is an industrial DIN-rail mounted module intended for direct PLC switching of DC loads such as solenoids, relays, indicators, and small actuators.
| Parameter | Value |
|---|---|
| I/O system | CJ I/O Bus |
| Expansion unit type | Basic I/O Unit |
| Type of module | Digital I/O |
| Number of digital outputs | 16 |
| Output type | NPN / sinking transistor |
| Rated voltage | 12 to 24 V DC |
| Operating load voltage range | 10.2 to 26.4 V DC |
| Maximum load current | 0.5 A/point, 5.0 A/unit |
| Maximum inrush current | 4.0 A/point, 10 ms max. |
| Leakage current | 0.1 mA max. |
| Residual voltage | 1.5 V max. |
| ON response time | 0.1 ms max. |
| OFF response time | 0.8 ms max. |
| Insulation resistance | 20 MΩ between external terminals and GR terminal (100 V DC) |
| Dielectric strength | 1,000 V AC between external terminals and GR terminal for 1 minute at 10 mA max. leakage current |
| Number of circuits | 16 (16 points/common, 1 circuit) |
| Internal current consumption | 5 V DC 100 mA max. |
| Fuse | None |
| External power supply | 10.2 to 26.4 V DC, 20 mA min. |
| I/O connection type | Screw terminal |
| Number of I/O connectors | 1 |
| Detachable I/O terminal block | Yes |
| Product height (unpacked) | 90 mm |
| Product width (unpacked) | 31 mm |
| Product depth (unpacked) | 89 mm |
| Product weight (unpacked) | 61 g |
| Weight (manual max.) | 110 g max. |
Use the 16 sinking transistor channels to switch multiple 24 VDC solenoid coils from a CJ-series controller with fast response and per-point current limiting.
Direct low-voltage DC coil actuation with compact wiring density and predictable switching speed.
Drive stacked lamps, status beacons, and small DC indication loads where fast discrete switching and simple screw-terminal wiring are required.
Reliable multi-channel status output without relay wear or mechanical contact bounce.
Interface PLC logic to small DC actuators, reject gates, or interposing relays in compact machine panels requiring 16 independent outputs.
High-density discrete output expansion in a limited cabinet footprint.
