USD 232.78
64-point sinking transistor output unit, 12-24 VDC loads, 0.3 A/point, MIL connectors, CJ-series PLC expansion.
CJ-series transistor output unit with 64 sinking outputs using MIL connectors. Rated for 12 to 24 VDC loads with 0.3 A per point and 6.4 A per unit maximum, designed for CJ-series PLC expansion with fast switching and connectorized wiring.
| Parameter | Value |
|---|---|
| Model | CJ1W-OD263 |
| Product type | Transistor output unit |
| Output type | Sinking outputs |
| Number of outputs | 64 points |
| Rated load voltage | 12 to 24 VDC |
| Operating load voltage range | 10.2 to 26.4 VDC |
| Maximum load current per point | 0.3 A/point |
| Maximum load current per common | 1.6 A/common |
| Maximum load current per unit | 6.4 A/unit |
| Maximum inrush current | 3.0 A/point, 10 ms max. |
| Leakage current | 0.1 mA max. |
| Residual voltage | 1.5 V max. |
| ON response time | 0.5 ms max. |
| OFF response time | 1.0 ms max. |
| Insulation resistance | 20 MΩ between external terminals and GR terminal (100 VDC) |
| Dielectric strength | 1,000 VAC between external terminals and GR terminal for 1 minute at 10 mA max. leakage current |
| Number of circuits | 64 (16 points/common, 4 circuits) |
| Internal current consumption | 170 mA max. |
| Fuse | None |
| External power supply | 10.2 to 26.4 VDC, 50 mA min. |
| Weight | 110 g max. |
Drives many discrete 24 VDC loads such as solenoids, lamps, and relay coils from a single CJ-series expansion slot with 64 outputs and 0.3 A per point capability.
Reduces PLC module count and wiring complexity when a machine needs numerous low-current discrete outputs.
Suitable for sequencing valves, clamps, and indicator devices where fast switching is needed, supported by 0.5 ms ON and 1.0 ms OFF response times.
Improves timing precision for fast discrete actuation in compact automated equipment.
MIL connector wiring and 64-point density make it effective for retrofitting legacy control panels that need organized high-channel-count output expansion.
Simplifies harness replacement and panel rework in dense control cabinets.
