USD 136.38
2-channel 0–10 VDC PLC analog output board, 1/4000 resolution, 2 kΩ min load, 20 mA max supply current.
CP1W-DAB21V is an Omron CP-series analog output option board for CP1L/CP1E-family PLC systems. Manufacturer documentation identifies it as a 2-channel voltage-output board with 0 to 10 VDC output range, 1/4000 full-scale resolution, 2 kΩ minimum load, 0.5 Ω maximum output impedance, no isolation between analog I/O terminals and internal circuits, and 5 VDC supply current of 20 mA max. Omron also publishes a typical refresh time of 30 ms ±40% depending on CPU/scan conditions.
| Parameter | Value |
|---|---|
| Output channels | 2 |
| Output signal range | 0 to 10 VDC |
| Resolution | 1/4000 (full scale) |
| External output allowable load resistance | 2 kΩ min. |
| External output impedance | 0.5 Ω max. |
| Isolation method | No isolation between analog I/O terminals and internal circuits. |
| Current consumption | 5 VDC: 20 mA max. |
| Refresh time | 30 ms ±40% |
Provides two 0–10 VDC analog commands for variable-frequency drives in compact machine panels where the PLC must generate stable speed references.
Eliminates the need for a separate analog output transmitter for small drive-control systems.
Drives voltage-input actuators, proportional valves, or panel instruments that accept a 0–10 V control signal in low-channel-count automation cells.
Supplies a direct analog command signal without adding a larger analog module.
Outputs repeatable analog references for calibration benches or small process skids that need moderate-accuracy voltage control from a CP-series PLC.
Enables PLC-based analog reference generation with 1/4000 resolution in a compact footprint.
