Omron E2K-L26MC1 2M: l capacitive sensor, 12 to 26 mm pipe diameter sensing, NPN open collector, 100 mA max. output, liquid level mode, 2 m cable.
The Omron E2K-L26MC1 2M is an E2K l capacitive sensor with 12 to 26 mm pipe diameter sensing capability. It provides NPN open collector, 100 mA max. output in liquid level operation and uses a 2 m pre-wired cable. Omron specifies 12 to 24 VDC (10.8 to 30 VDC) and IP66 protection for this family. Confirm sensing conditions and controller compatibility in the application.
Omron E2K L capacitive sensor with 12 to 26 mm pipe diameter sensing and NPN open collector, 100 mA max. liquid level output.
| Parameter | Value |
|---|---|
| Manufacturer | Omron |
| Series | E2K-L |
| Product type | capacitive liquid level sensor |
| Sensing method | Capacitive |
| Sensing distance | 12 to 26 mm pipe diameter |
| Output | NPN open collector, 100 mA max. |
| Operation mode | liquid level |
| Connection | 2 m pre-wired cable |
| Rated supply voltage | 12 to 24 VDC (10.8 to 30 VDC) |
| Degree of protection | IP66 |
| Applicable pipe material | Non-metal |
| Maximum pipe wall thickness | 1.5 mm |
| Repeat accuracy | ±0.2 mm max. |
| Operating temperature | 0 to 55°C |
| Storage temperature | -10 to 65°C |
| Ambient humidity | 25 to 85% RH |
| Packed weight | Approx. 70 g |
| Housing material | Heat-resistant ABS; cable clamp NBR |
| Physical Weight (kg) | Not stated in the checked manufacturer product data. |
| Dimensions L x W x H (cm) | See manufacturer dimensional data; no complete overall L × W × H value stated. |
| Supply status | Unknown; exact specifications are confirmed, current supply status was not established. |
Engineering suggestions require suitability checks for your installation.
Monitor liquid presence through a non-metal pipe without contact with the liquid.
Mount the sensor on a NO detection point of a compatible 12 to 26 mm diameter pipe and validate the liquid and pipe combination.
Provide a discrete level signal from an external pipe-mounted sensor.
Use the NPN open-collector output with a compatible controller input; verify the liquid dielectric properties and installation per Omron guidance.
