Omron E52-CA6D-N 2M K-type thermocouple with grounded contact, SUS304 sheath and 2 m PFA-insulated lead.
The Omron E52-CA6D-N 2M is a low-cost K-type thermocouple with grounded thermal contact and SUS304 protective tubing. Its model designation identifies the 6 mm screw form and the selected 2 m lead length. Omron specifies a 0°C to 350°C temperature range and a PFA-covered thermocouple lead rated to 150°C; the manufacturer recommends firm contact between the probe tip and the sensing object.
Grounded K-type thermocouple with a 6 mm screw form, 2 m PFA lead and 0°C to 350°C range.
| Parameter | Value |
|---|---|
| Manufacturer | Omron |
| Product type | Low-cost K-type thermocouple |
| Element type | K (CA) |
| Class | Class 2 (0.75) |
| Thermal contact | Grounded type |
| Protective tubing | SUS304; screw-mounted exposed-lead model |
| Temperature range | 0°C to 350°C |
| Lead wire | 2 m PFA-covered thermocouple wire; rated to 150°C |
| Installation note | Not airtight; Omron recommends the probe tip touch the sensing object |
| Physical Weight (kg) | Not stated in the checked manufacturer product data. |
| Dimensions L x W x H (cm) | Overall L × W × H not stated in the checked manufacturer product data. |
| Supply status | Unknown; exact model and specifications are confirmed, current supply status was not established. |
Engineering suggestions require suitability checks for your installation.
Monitor the temperature of a heated machine component using a screw-mounted thermocouple probe.
Fit the sensor to a suitable threaded point and connect the K-type output to a compatible controller; verify contact and lead temperature limits.
Read the temperature of a metal fixture or process surface where the probe can make direct contact.
Route the 2 m PFA-covered lead to the instrumentation and keep it within its 150°C lead rating.
