Omron E52-CA1DY-40 M6 2M grounded K-type thermocouple with M6 × 1.0 screw and silicone-covered lead.
The Omron E52-CA1DY-40 M6 2M is a grounded K-type thermocouple with an SUS304 M6 screw fitting and a 2 m silicone-covered lead. The manufacturer specifies a 0°C to 300°C measurement range, Class 2 (0.75) element and an M6 thread pitch of 1.0 mm. Its lead is rated from 0°C to 150°C and terminates in an M3.5 Y-type crimp terminal.
Grounded K-type thermocouple with M6 × 1.0 fitting and 2 m silicone-covered lead.
| Parameter | Value |
|---|---|
| Manufacturer | Omron |
| Element type | K (CA) thermocouple |
| Element class | Class 2 (0.75) |
| Thermal contact | Grounded type |
| Temperature range | 0°C to 300°C |
| Screw | SUS304; M6 pitch 1.0 mm |
| Lead wire | 2 m silicone-covered; 0°C to 150°C |
| Terminal | Y-type crimp terminal for M3.5 |
| Physical Weight (kg) | Not stated in the checked manufacturer product data. |
| Dimensions L x W x H (cm) | Overall L × W × H not stated in the checked manufacturer product data. |
| Supply status | Unknown; exact model and specifications are confirmed, current supply status was not established. |
Engineering suggestions require suitability checks for your installation.
Measure a machine or fixture surface at a location prepared for an M6 threaded probe.
Install for reliable tip contact and connect the K-type leads to a compatible input; verify grounding and lead temperature limits.
Provide temperature feedback from a heated component where a flexible 2 m lead eases wiring.
Route the silicone-covered cable away from hot zones and keep it within its 150°C rating.
