Omron E3ZG-R86-S: retro-reflective with MSR sensor, up to 4 m, PNP, IP67.
The Omron E3ZG-R86-S is a compact, built-in-amplifier retro-reflective with MSR photoelectric sensor. Its sensing distance is up to 4 m with the specified reflector and it provides a PNP output. The model uses a M8 connector, 12–24 V DC supply, 1 ms max response and IP67 protection.
PNP photoelectric sensor, retro-reflective sensing up to 4 m.
| Parameter | Value |
|---|---|
| Manufacturer | Omron |
| Product type | Compact photoelectric sensor with built-in amplifier |
| Sensing method | retro-reflective with MSR |
| Sensing distance | 4 m maximum with E39-R1S reflector; minimum sensor-to-reflector spacing 100 mm |
| Output type | PNP open collector |
| Light source | Red LED, 660 nm |
| Power supply | 12–24 V DC ±10% |
| Current consumption | 30 mA max. |
| Response time | 1 ms max. |
| Operation mode | Light-ON / Dark-ON selectable |
| Connection | M8 connector |
| Degree of protection | IP67 |
| Operating temperature | -25 to 55°C; confirm limits for selected variant |
| Physical Weight (kg) | Sensor-only weight not stated in the checked manufacturer source. |
| Dimensions L x W x H (cm) | Overall L × W × H not stated in the checked source. |
| Supply status | Unknown; exact model specifications confirmed, current supply status not established. |
Engineering suggestions require suitability checks for your installation.
Check a part or carrier at a fixed sensing point using a reflector.
Select a compatible reflector and verify alignment, target size and sensor output polarity.
Monitor product passage at a conveyor or packaging station.
Set Light-ON or Dark-ON mode and confirm response, wiring and optical conditions on the installed machine.
