USD 176.00
Schneider Electric LC1DT60AM7 is a 4-pole, 60 A AC-1 contactor with four normally open poles and a 220 V AC 50/60 Hz coil.
The LC1DT60AM7 is a TeSys Deca four-pole contactor for AC-1 resistive-load switching, rated at 60 A and up to 440 V. It has four normally open main poles, a 220 V AC 50/60 Hz coil, and screw-clamp control terminals. The manufacturer lists a front-face IP20 rating and a 1.09 kg product weight; Schneider currently lists the part as commercialized in some markets, although regional stock status varies.
Four-pole 60 A AC-1 contactor with a 220 V AC coil for resistive-load switching.
| Parameter | Value |
|---|---|
| Sensor | Not applicable to this product |
| Shutter | Not applicable to this product |
| Resolution | Not applicable to this product |
| Pixel size | Not applicable to this product |
| Optical sensor class | Not applicable to this product |
| Optical sensor size | Not applicable to this product |
| Frame rate | Not applicable to this product |
| Exposure time | Not applicable to this product |
| Power consumption | See input current and voltage |
| Power supply | See product-specific power specification |
| Image memory | Not applicable to this product |
| Operating temperature | See product-specific environmental specification |
| Storage temperature | See product-specific environmental specification |
| Relative humidity | See product-specific environmental specification |
| Interface | See product-specific interface specification |
| I/O connector | See product-specific connector specification |
| Lens mount | Not applicable to this product |
| IP rating | See product-specific enclosure specification |
| Housing material | See product-specific construction specification |
| Product type | TeSys Deca power contactor |
| Main poles | 4P, 4 normally open |
| Utilization category | AC-1 resistive load |
| Rated operational current | 60 A |
| Rated operational voltage | Up to 440 V AC |
| Coil voltage | 220 V AC, 50/60 Hz |
| Auxiliary contacts | 1 NO + 1 NC |
| Power terminals | EverLink BTR screw terminals |
| Control terminals | Screw clamp |
| IP rating | IP20 on front face |
| Operating ambient temperature | -40 to 60 °C; derating above 60 °C |
| Product weight | 1.09 kg |
| Physical Weight (kg) | 1.09 |
| Dimensions L x W x H (cm) | 12.0 x 7.0 x 12.2 |
Engineering suggestions require suitability checks for your installation.
A control panel may need to switch a multi-phase resistive heater load using a contactor coil controlled by a relay or PLC output.
The four normally open poles and 60 A AC-1 rating provide a switching element for appropriately sized resistive loads; verify load current, coil drive, coordination, and local electrical code.
An HVAC panel may require coordinated isolation and switching of auxiliary resistive loads.
The TeSys Deca contactor can be integrated into a suitable control cabinet after checking the load category, short-circuit protection, and enclosure environment.
