1. Compact part passage detection
Use in a compact part passage detection station in a production machine.
Check target dimensions, sensing geometry, mounting, wiring and controller compatibility during machine design.
Omron E3T-ST14M 2M: M3-mounting 1 m through-beam sensor set with PNP
Dark-ON output and 2 m cable. Supply status not established.
The Omron E3T-ST14M 2M is an M3-mounting through-beam sensor set with PNP output and Dark-ON operation. It uses a red 650 nm LED, has a 1 m sensing distance and 2 m pre-wired cable, and runs on 12–24 V DC. The compact set is rated IP67 and responds within 1 ms.
M3-mounting 1 m through-beam sensor set with PNP Dark-ON output and 2 m cable.
M3-mounting 1 m through-beam sensor set with PNP Dark-ON output and 2 m cable.
| Parameter | Value |
|---|---|
| Sensing method | Through-beam emitter + receiver; M3 mount |
| Sensing distance | 1 m |
| Output | PNP open collector; Dark-ON; 50 mA max. |
| Light source | Red LED, 650 nm |
| Supply voltage | 12–24 VDC ±10% |
| Current consumption | 30 mA max. (emitter 10 mA / receiver 20 mA max.) |
| Response time | 1 ms max. |
| Connection | Pre-wired cable, 2 m |
| Protection | IP67 |
| Physical Weight (kg) | Approx. 0.040 kg packed |
| Dimensions L x W x H (cm) | Refer to Omron ST-series M3 outline drawing |
Engineering suggestions require suitability checks for your installation.
Use in a compact part passage detection station in a production machine.
Check target dimensions, sensing geometry, mounting, wiring and controller compatibility during machine design.
Apply the Omron component to a machine slot monitoring task.
Validate operation on representative parts and confirm environmental and installation limits against Omron documentation.