Omron E2EY-X8C1 2M: M30 NPN proximity sensor for non-ferrous metals with
8 mm range and 2 m cable. Supply status not established.
The Omron E2EY-X8C1 2M is a DC 3-wire NPN proximity sensor for aluminum, brass and other non-ferrous metals; it does not detect iron. The M30 unit has a 8 mm sensing distance and standard aluminum target of 30 × 30 × 1 mm. It operates from 12–24 V DC, includes a 2 m pre-wired cable and is rated IP67 with oil resistance.
M30 NPN proximity sensor for non-ferrous metals with 8 mm range and 2 m cable.
| Parameter | Value |
|---|---|
| Sensing principle | Inductive; aluminum / non-ferrous metal detecting |
| Size | M30 |
| Sensing distance | 8 mm ±10% |
| Set distance | 0 to 5.6 mm |
| Standard aluminum target | 30 × 30 × 1 mm |
| Output | NPN open collector, NO; 100 mA max. |
| Supply voltage | 12–24 VDC nominal (10–30 VDC operating range) |
| Current consumption | 20 mA max. |
| Response frequency | 70 Hz |
| Connection | Pre-wired cable, 2 m |
| Protection | IP67; oil-resistant |
| Case material | Nickel-plated brass |
| Physical Weight (kg) | Approx. 0.190 kg packed |
| Dimensions L x W x H (cm) | Refer to Omron M18/M30 outline drawing |
Engineering suggestions require suitability checks for your installation.
Use in a non-ferrous metal detection station in a production machine.
Check target dimensions, sensing geometry, mounting, wiring and controller compatibility during machine design.
Apply the Omron component to a aluminum workpiece presence task.
Validate operation on representative parts and confirm environmental and installation limits against Omron documentation.
