Technical Overview
The Omron E2F-X1R5E1 2M is a shielded E2F resin-case inductive proximity sensor in M8 format. It detects ferrous targets at 1.5 mm nominal sensing distance and uses a DC 3-wire NPN normally-open output. The sensor runs from 12–24 V DC, has a 2 m pre-wired cable and an IP68 enclosure rating.
M8 NPN resin-case proximity sensor with 1.5 mm range and 2 m cable.
Key Features
- Exact Omron model: E2F-X1R5E1 2M
- Shielded M8 cylindrical proximity sensor
- Sensing distance: 1.5 mm; set distance: 0 to 1.2 mm
- Ferrous target: iron, 8 × 8 × 1 mm
- DC 3-wire NPN output; NO
- 12–24 V DC nominal; 10–30 V DC operating range
- IP68 resin housing; oil-resistant family design
- 2 m pre-wired cable; 17 mA max. current
- Supply status: Unknown
M8 NPN resin-case proximity sensor with 1.5 mm range and 2 m cable.
Technical Specification Matrix
| Parameter | Value |
| Sensing principle | Inductive proximity sensor; shielded |
| Sensing head size | M8 |
| Sensing distance | 1.5 mm ±10% |
| Set distance | 0 to 1.2 mm |
| Differential travel | 10% max. of sensing distance |
| Detectable target | Ferrous metal; sensing distance decreases with non-ferrous metals |
| Standard sensing object | Iron, 8 × 8 × 1 mm |
| Response frequency | 2 kHz average |
| Output | DC 3-wire NPN open collector; normally open; 200 mA max. |
| Supply voltage | 12–24 VDC nominal (10–30 VDC operating); ripple 10% max. |
| Current consumption | 17 mA max. |
| Residual voltage | 2 V max. at 200 mA load, 2 m cable |
| Operating temperature | −25 to 70 °C, no icing or condensation |
| Operating humidity | 35% to 95% RH |
| Protection | IP68; Omron in-house oil-resistant rating |
| Connection | Pre-wired cable, 2 m |
| Housing material | Polyarylate resin case |
| Physical Weight (kg) | Approx. 0.040 kg packed |
| Dimensions L x W x H (cm) | Refer to Omron model-specific outline drawing |
Suggested applications
Engineering suggestions require suitability checks for your installation.
1. Ferrous part presence detection
Detect a steel component at a machine fixture, transfer point or assembly station.
Potential use
Set the sensor within the specified operating distance and confirm target dimensions, mounting clearance and controller input polarity during commissioning.
M8
1.5 mm
NPN
2. Water-exposed machine sensing
Monitor a ferrous target near equipment exposed to washdown or water ingress risk.
Potential use
Use the IP68 resin-case construction within the stated environmental ratings and validate the actual installation; avoid incompatible cutting-oil exposure.
IP68
2 m cable
Ferrous target