Technical Overview
The Omron E2F-X2E1 2M is a shielded E2F resin-case inductive proximity sensor in M12 format. It detects ferrous targets at 2 mm nominal sensing distance and uses a DC 3-wire NPN normally-open output. The sensor runs from 12–24 V DC, has a 2 m pre-wired cable and an IP68 enclosure rating.
M12 NPN resin-case proximity sensor with 2 mm range and 2 m cable.
Key Features
- Exact Omron model: E2F-X2E1 2M
- Shielded M12 cylindrical proximity sensor
- Sensing distance: 2 mm; set distance: 0 to 1.6 mm
- Ferrous target: iron, 12 × 12 × 1 mm
- DC 3-wire NPN output; NO
- 12–24 V DC nominal; 10–30 V DC operating range
- IP68 resin housing; oil-resistant family design
- 2 m pre-wired cable; 17 mA max. current
- Supply status: Unknown
M12 NPN resin-case proximity sensor with 2 mm range and 2 m cable.
Technical Specification Matrix
| Parameter | Value |
| Sensing principle | Inductive proximity sensor; shielded |
| Sensing head size | M12 |
| Sensing distance | 2 mm ±10% |
| Set distance | 0 to 1.6 mm |
| Differential travel | 10% max. of sensing distance |
| Detectable target | Ferrous metal; sensing distance decreases with non-ferrous metals |
| Standard sensing object | Iron, 12 × 12 × 1 mm |
| Response frequency | 1.5 kHz average |
| Output | DC 3-wire NPN open collector; normally open; 200 mA max. |
| Supply voltage | 12–24 VDC nominal (10–30 VDC operating); ripple 10% max. |
| Current consumption | 17 mA max. |
| Residual voltage | 2 V max. at 200 mA load, 2 m cable |
| Operating temperature | −25 to 70 °C, no icing or condensation |
| Operating humidity | 35% to 95% RH |
| Protection | IP68; Omron in-house oil-resistant rating |
| Connection | Pre-wired cable, 2 m |
| Housing material | Polyarylate resin case |
| Physical Weight (kg) | Approx. 0.050 kg packed |
| Dimensions L x W x H (cm) | Refer to Omron model-specific outline drawing |
Suggested applications
Engineering suggestions require suitability checks for your installation.
1. Ferrous part presence detection
Detect a steel component at a machine fixture, transfer point or assembly station.
Potential use
Set the sensor within the specified operating distance and confirm target dimensions, mounting clearance and controller input polarity during commissioning.
M12
2 mm
NPN
2. Water-exposed machine sensing
Monitor a ferrous target near equipment exposed to washdown or water ingress risk.
Potential use
Use the IP68 resin-case construction within the stated environmental ratings and validate the actual installation; avoid incompatible cutting-oil exposure.
IP68
2 m cable
Ferrous target