Omron E2F-X5E1 2M Proximity Sensor

Omron E2F-X5E1 2M: M18 NPN proximity sensor, 5 mm sensing range, IP68
resin case and 2 m cable.

SKU Omron-E2F-X5E1 2M Category
Top Brands > Omron > Omron Proximity Sensors

Omron E2F-X5E1 2M Resin-case Proximity Sensor

BrandOmron
Model IdentifierE2F-X5E1 2M
Official Part NumberE2F-X5E1 2M

Technical Overview

The Omron E2F-X5E1 2M is a shielded E2F resin-case inductive proximity sensor in M18 format. It detects ferrous targets at 5 mm nominal sensing distance and uses a DC 3-wire NPN normally-open output. The sensor runs from 12–24 V DC, has a 2 m pre-wired cable and an IP68 enclosure rating.

M18 NPN resin-case proximity sensor with 5 mm range and 2 m cable.

Key Features

  • Exact Omron model: E2F-X5E1 2M
  • Shielded M18 cylindrical proximity sensor
  • Sensing distance: 5 mm; set distance: 0 to 4 mm
  • Ferrous target: iron, 18 × 18 × 1 mm
  • DC 3-wire NPN output; NO
  • 12–24 V DC nominal; 10–30 V DC operating range
  • IP68 resin housing; oil-resistant family design
  • 2 m pre-wired cable; 17 mA max. current
  • Supply status: Unknown

M18 NPN resin-case proximity sensor with 5 mm range and 2 m cable.

Technical Specification Matrix

ParameterValue
Sensing principleInductive proximity sensor; shielded
Sensing head sizeM18
Sensing distance5 mm ±10%
Set distance0 to 4 mm
Differential travel10% max. of sensing distance
Detectable targetFerrous metal; sensing distance decreases with non-ferrous metals
Standard sensing objectIron, 18 × 18 × 1 mm
Response frequency600 Hz average
OutputDC 3-wire NPN open collector; normally open; 200 mA max.
Supply voltage12–24 VDC nominal (10–30 VDC operating); ripple 10% max.
Current consumption17 mA max.
Residual voltage2 V max. at 200 mA load, 2 m cable
Operating temperature−25 to 70 °C, no icing or condensation
Operating humidity35% to 95% RH
ProtectionIP68; Omron in-house oil-resistant rating
ConnectionPre-wired cable, 2 m
Housing materialPolyarylate resin case
Physical Weight (kg)Approx. 0.130 kg packed
Dimensions L x W x H (cm)Refer to Omron model-specific outline drawing

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Ferrous part presence detection

Detect a steel component at a machine fixture, transfer point or assembly station.

Potential use

Set the sensor within the specified operating distance and confirm target dimensions, mounting clearance and controller input polarity during commissioning.

M18 5 mm NPN

2. Water-exposed machine sensing

Monitor a ferrous target near equipment exposed to washdown or water ingress risk.

Potential use

Use the IP68 resin-case construction within the stated environmental ratings and validate the actual installation; avoid incompatible cutting-oil exposure.

IP68 2 m cable Ferrous target
Select your currency