Omron E2F-X10Y1 2M AC Proximity Sensor. M30 AC sensor | 10 mm | 2 m
cable. Supply status not confirmed.
The E2F-X10Y1 2M is an Omron shielded resin-case inductive proximity sensor in M30 size, with a 10 mm nominal sensing distance and AC two-wire normally-open output. The manufacturer lists a 2 m pre-wired cable and notes different-frequency variants for this model family. The E2F family specification gives the shared sensing and enclosure data; current supply status was not established from the checked manufacturer source.
M30 AC sensor | 10 mm | 2 m cable.
| Parameter | Value |
|---|---|
| Sensor type | Shielded inductive proximity sensor |
| Body size | M30 |
| Sensing distance | 10 mm ±10% |
| Set distance | 0 to 8 mm |
| Output | AC 2-wire, normally open |
| Rated supply voltage | 24–240 VAC |
| Operating voltage range | 20–264 VAC |
| Connection | Pre-wired cable, 2 m |
| Protection | IP68; oil-resistant family design |
| Physical Weight (kg) | Not stated for this exact model in the checked source. |
| Dimensions L x W x H (cm) | Refer to Omron dimensional drawing; overall L × W × H not stated as a single value. |
| Supply status | Unknown; exact model and product specifications confirmed from Omron documentation, current availability not established. |
Engineering suggestions require suitability checks for your installation.
Use the inductive sensor to detect compatible metal targets in an industrial machine.
Select the model only after confirming target material, sensing distance, supply voltage, output circuit and mounting clearances.
Detect a compatible metal target at a defined point in a machine or production line.
Check sensing distance, target dimensions, mounting and output circuit against the controller input.
Confirm presence or position of a metal component as part of an automated sequence.
Allow for target material, approach direction, response frequency and installation clearances.
