1. LED feeder monitoring
An LED feeder using the TP-100 system needs a connection between its sensing components. The CN-14A-EP1-C2 provides a shielded, preassembled cable for this installation. Its 2 m length supports nearby equipment placement, while the connectors at both ends simplify assembly of the sensor connection.
Problem Solved
Provides a ready-made sensor connection for the feeder, reducing cable preparation work while keeping the installation within the documented TP-100 system compatibility.
TP-100
2 m
2. Tablet passage detection
In a tablet passage detection installation using TP-100 sensors, electrical interference can complicate signal transmission. The cable incorporates a tinned-copper wire shield to limit electromagnetic noise coupling. It supports the sensor connection; passage detection and output processing are performed by the connected TP-100 components.
Problem Solved
Shielding helps protect the sensor connection against electromagnetic noise, supporting signal transmission in the tablet monitoring installation without adding separate sensing functionality.
Shielded cable
TP-100
3. Screw feeder servicing
A screw feeder equipped with a TP-100 system may require cable replacement during maintenance. Connectors at both ends allow the connection to be renewed using a preassembled cable. The specified 3.8 mm cable diameter provides a concrete routing dimension when restoring the existing installation.
Problem Solved
Preassembled connectors reduce cable termination work during replacement, helping maintenance staff restore the compatible sensor connection with a cable of documented length and diameter.
Connectors at both ends
3.8 mm
