| Product type / family | FP-XH C40T general-purpose programmable controller control unit |
| Built-in digital inputs | 24 points; 24 V DC; bidirectional sink/source inputs |
| Built-in digital outputs | 16 NPN transistor outputs |
| Output method / isolation | NPN open collector; optocoupler isolation |
| Output load rating | 5–24 V DC nominal; 4.75–26.4 V DC permissible; maximum 0.5 A per point; common and installation limits apply |
| Output common arrangement | 8 points per common for C40 |
| Output off-state leakage / on-state drop | 1 µA maximum leakage; 0.3 V DC maximum on-state voltage drop |
| Program / control method | Ladder programming; cyclic operation |
| Program memory | Built-in Flash-ROM; 24k/32k/40k steps selectable; 32k default |
| Data-register capacity | 64k/32k/12k words depending on selected program capacity |
| Basic-instruction speed | From 0.04 µs/step within the first 5k steps; from 0.7 µs/step beyond 5k steps |
| High-level instruction speed | From 0.22 µs/step within the first 5k steps; from 1.73 µs/step beyond 5k steps |
| Pulse / PWM output | 4 built-in pulse channels, 100 kHz maximum; 4 PWM channels; availability and limits depend on configuration |
| High-speed counters | Single phase: 8 channels (100 kHz × 4 and 10 kHz × 4); two phase: 4 channels (50 kHz × 2 and 10 kHz × 2) |
| Programming interface | USB port; Control FPWIN GR7 / Control FPWIN Pro7 software |
| Expansion / communications | Compatible FP-X/FP-X0 expansion units and FP-XH application/communication cassettes; options are separate and configuration limits apply |
| Power supply | 100–240 V AC |
| Input current | 320 mA maximum at 100 V AC; 195 mA maximum at 200 V AC |
| Power consumption | A real-power wattage is not specified in the cited catalog; input-current ratings are listed separately |
| Operating temperature | 0 to +55 °C |
| Storage temperature | −40 to +70 °C |
| Relative humidity | 10–95% RH at 25 °C for operation and storage; no condensation |
| Operating environment | No corrosive gases or excessive dust; pollution degree 2; overvoltage category II |
| I/O connection | Terminal blocks; connector pin counts are not specified in the cited ordering entry |
| IP rating / housing material | Not specified in the cited manufacturer catalog |
| Physical Weight (kg) | 0.545 |
| Dimensions L x W x H (cm) | 15.0 x 8.2 x 9.0 |
| Dimension and weight basis | Approximate unit weight; body width × depth × height from the manufacturer's 150 × 82 × 90 mm drawing; mounting projection excluded |
| Lifecycle status | Active — current FP-XH ordering table lists AFPXHC40T |