Technical Overview
The Panasonic ER-FAPS-C is an AC adapter listed as an option for the ER-F fan-type ionizer family in Panasonic's China catalog. It accepts 100–240 V AC at 50/60 Hz and provides 24 V DC at 2 A, with a 1.8 m cable between the adapter and the device connector. Panasonic's accessory note rates the supplied AC cord at 125 V AC and requires a suitably rated separate cord when operating above 125 V AC. The adapter-specific body dimensions, weight and environmental ratings are not published on the cited options page and must not be taken from the ionizer itself.
AC adapter for ER-F ionizers with 100–240 V AC input, 24 V DC 2 A output and a 1.8 m adapter-to-connector cable.
Key Features
- Exact Panasonic ER-FAPS-C accessory listed for the ER-F fan-type ionizer family
- 100–240 V AC rated input range
- 50/60 Hz input frequency
- 24 V DC rated output at 2 A
- 48 W rated DC output capacity, calculated from 24 V × 2 A
- 1.8 m cable length between the adapter and device connector
- Manufacturer requires a separately prepared suitable AC cord for operation above the supplied cord's 125 V AC rating
- Active listing for the -C variant in Panasonic's regional ER-F options catalog
24 V DC, 2 A output for ER-F ionizer power; use an AC cord rated for the actual mains voltage.
Technical Specification Matrix
| Parameter | Value |
|---|
| Product type | AC-to-DC power adapter |
| Manufacturer model | ER-FAPS-C |
| Compatible product family | Panasonic ER-F fan-type ionizers; listed as an ER-F optional accessory |
| AC input voltage | 100–240 V AC |
| AC input frequency | 50/60 Hz |
| DC output voltage | 24 V DC |
| DC output current | 2 A |
| Rated DC output capacity | 48 W (calculated: 24 V × 2 A); not an AC input-power or efficiency specification |
| Adapter-to-connector cable | 1.8 m |
| AC cord voltage limitation | Supplied AC cord rated 125 V AC; prepare a suitable separate cord when operating above 125 V AC |
| Connector / pin count | Device connector provided on the cable; pin count and polarity are not specified on the cited options page |
| Operating / storage temperature | Not published for this adapter on the cited manufacturer options page |
| Relative humidity | Not published for this adapter on the cited manufacturer options page |
| IP rating / housing material | Not published for this adapter on the cited manufacturer options page |
| Physical Weight (kg) | Not published for ER-FAPS-C in the cited manufacturer catalog |
| Dimensions L x W x H (cm) | Not published for ER-FAPS-C in the cited manufacturer catalog |
| Lifecycle status | Active — exact -C variant remains listed in Panasonic's regional ER-F accessory catalog |
Suggested applications
Engineering suggestions require suitability checks for your installation.
1. ER-F ionizer power at an assembly workstation
A workstation uses a compatible ER-F ionizer and needs a matching AC-to-DC supply accessory near the point of use.
Potential use
The specified 24 V DC, 2 A output and 1.8 m device cable can support the compatible ionizer installation. Confirm the precise ionizer model and connector, and select an AC cord rated for the site's mains voltage.
ER-F accessory
24 V DC
2 A output
1.8 m cable
2. Maintaining a compatible ionizer power setup
Maintenance personnel need to specify the correct power accessory for an ER-F installation while preserving the exact regional model identity.
Potential use
Use the ER-FAPS-C identity and published input/output ratings to check the required adapter against the installed equipment. Verify connector compatibility and the AC cord rating before replacing or installing a supply.
ER-FAPS-C
100–240 V AC
50/60 Hz
Exact-model check
