| Manufacturer part number | MDDLN55SG011 |
| Base style / custom specification | MDDLN55SG / 011; Panasonic defines positions 10–12 as the custom-specification field |
| Product family | MINAS A6 |
| Series / type | A6SG series; RS485/RS232 communication type (pulse train only) |
| Lifecycle | Current Panasonic special-order base model listing; verify availability and the 011 approval specification with Panasonic |
| Frame | D-frame |
| Frequency response | 3.2 kHz |
| Control method | IGBT PWM sinusoidal drive; position control |
| Control modes | Position control, internal velocity command, or position/internal velocity command |
| Maximum applicable motor rating | Up to 1.5 kW, depending on the manufacturer-approved motor combination |
| Main-circuit input power | Single- or three-phase 200–240 V AC (+10%, −15%), 50/60 Hz |
| Control-circuit input power | Single-phase 200–240 V AC (+10%, −15%), 50/60 Hz |
| Input power capacity | Approximately 2.3 kVA for the MDDL*55** frame code |
| Encoder feedback | 23-bit absolute encoder; 8,388,608-count resolution; 7-wire serial interface |
| Command pulse input | 2 inputs; photocoupler and line receiver |
| Maximum command pulse frequency | 500 kpps via photocoupler; 8 Mpps via line receiver |
| Control signal inputs | 10 general-purpose inputs with parameter-assigned functions |
| Control signal outputs | 6 general-purpose outputs with parameter-assigned functions |
| Analog monitor outputs | 2 |
| Pulse signal outputs | 4 total: 3 line-driver outputs and 1 open-collector output |
| Communication interfaces | USB, RS232, RS485 and Modbus RTU |
| Serial topology | RS232 1:1; RS485 and Modbus RTU 1:n; RS485 supports up to 31 axes |
| Parallel I/O connector | 50-pin JAE DF02R050NA2 or equivalent, per Panasonic A6 driver documentation |
| Regeneration | Built-in regenerative resistor; external regenerative resistor supported |
| Dynamic brake | Built in |
| Operating temperature | 0–55 °C, non-freezing |
| Storage temperature | −20–65 °C, non-condensing |
| Operating and storage humidity | 20–85% RH, non-condensing |
| Installation altitude | 1,000 m or less above sea level |
| Vibration resistance | 5.88 m/s² or less at 10–60 Hz |
| Dielectric strength | 1,500 V AC for 1 minute between primary power supply and ground; 20 mA sensing current |
| Safety function | Without functional safety |
| IP rating | Not stated in the cited Panasonic product specifications |
| Housing material | Not stated in the cited Panasonic product specifications |
| Physical Weight (kg) | 2.1 |
| Dimensions L x W x H (cm) | 17.0 x 8.5 x 15.0 (D x W x H) |