1. Counting separated opaque cartons
A carton conveyor can place the sensor on one side and a passive reflector on the other. Each opaque carton interrupts the returned red beam, producing a NPN switching event for the counter. Retro-reflective sensing provides the optical path, while the 1,000 Hz switching frequency supports repeated transitions within the specified timing limits.
Problem Solved
The reflector needs no electrical supply, reducing wiring across the conveyor while the machine receives a discrete event for each separated carton that interrupts the beam.
Retro-reflective
NPN
1,000 Hz
2. Monitoring accumulation at a transfer point
At a conveyor transfer, a load that remains between the sensor and reflector holds the received-light signal in the blocked state. The machine controller can use this duration to identify sustained occupancy and regulate upstream release. Selectable light/dark switching adapts the signal polarity, while the M12 4-pin connector connects the sensor to local machine wiring.
Problem Solved
A sustained beam blockage identifies a transfer position that remains occupied, helping the controller coordinate upstream feeding before additional loads enter the same constrained space.
Light/dark switching
M12 4-pin connector
Beam interruption
3. Checking opaque sheet continuity
An opaque sheet feeder can direct the returned beam through the expected material path. The sensor detects whether the material continues to block that path, and an opening caused by runout or a break changes its switching state. IP67 protection suits exposed machine mounting, while the visible red beam assists positioning during initial setup.
Problem Solved
A change in the received-light state gives the controller an electrical indication of missing material at the monitoring position, supporting an orderly response to interrupted feed.
IP67
Visible red light
Material continuity