SICK 1049062 WL9-3P2430 PNP Retro-Reflective Sensor

USD 136.50

WL9-3P2430 provides coaxial retro-reflective sensing, complementary PNP outputs, 1,000 Hz switching and an M12 4-pin connector in a VISTAL housing.

SKU SICK-1049062 Category
SICK W9

SICK WL9-3P2430 PNP Coaxial Retro-Reflective Sensor

BrandSICK
Model IdentifierWL9-3P2430
Official Part Number1049062

Technical Overview

The SICK WL9-3P2430 is a retro-reflective photoelectric sensor with coaxial optics and complementary PNP outputs. Its autocollimation arrangement operates without a minimum reflector distance, allowing close reflector placement in restricted machine layouts. With a PL80A reflector, the specified sensing range is 0–2.5 m and the maximum range is 0–4 m. The visible red PinPoint LED produces a 45 mm spot at 1.5 m, with no sensitivity adjustment provided. A response below 0.5 ms, 1,000 Hz switching frequency, M12 4-pin connector and IP66/IP67/IP69K VISTAL housing support machine integration.

PNP coaxial retro-reflective sensor with 0–2.5 m sensing using PL80A, complementary outputs, 1,000 Hz switching and M12 4-pin connector.

Key Features

  • Coaxial/autocollimation retro-reflective optics
  • No minimum reflector distance
  • 0–2.5 m sensing range with PL80A reflector
  • 0–4 m maximum range with PL80A reflector
  • 650 nm visible red PinPoint LED; Ø 45 mm at 1.5 m
  • Complementary PNP light/dark outputs
  • Response < 0.5 ms; 1,000 Hz switching
  • M12 4-pin connector; M3 mounting holes
  • Optical configuration without sensitivity adjustment
  • VISTAL housing with IP66/IP67/IP69K protection

Use coaxial optics to place the reflector close to the sensor while keeping electrical wiring on one side of the machine.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensor with autocollimation/coaxial optics; no minimum reflector distance
Sensing range0–2.5 m with PL80A reflector
Maximum sensing range0–4 m with PL80A reflector
Light sourcePinPoint LED, visible red light
Wavelength650 nm
Light spot sizeØ 45 mm at 1.5 m
AdjustmentNone
MountingM3 mounting holes
Power supply10–30 V DC; short-circuit-protected network, max. 8 A
Residual ripple< 5 Vpp; remain within supply-voltage limits
Current consumption30 mA without load
Switching outputPNP, complementary
Switching modeLight/dark switching; Q = light switching
Output current≤ 100 mA; maximum 50 mA at ambient temperature ≥ 50 °C
Response time< 0.5 ms with resistive load
Switching frequency1,000 Hz at light/dark ratio 1:1
ConnectionMale connector M12, 4-pin
Circuit protectionSupply/input/output reverse-polarity protection and interference suppression
Protection classIII
Housing formRectangular
Housing materialVISTAL plastic
Optics materialPMMA plastic
IP ratingIP66, IP67 and IP69K
Operating temperature−40 to +60 °C
Storage temperature−40 to +75 °C
UL fileNRKH.E181493
MTTFD2,700 years
Diagnostic coverage DCavg0%
Mission time20 years
Dimensions L x W x H (cm)2.36 x 1.22 x 5.22
Physical Weight (kg)0.013

Industrial Applications

1. Counting separated opaque cartons

A carton conveyor can place the sensor on one side and a passive reflector on the other. Each opaque carton interrupts the returned red beam, producing a PNP switching event for the counter. Retro-reflective sensing provides the optical path, while the 1,000 Hz switching frequency supports repeated transitions within the specified timing limits.

Problem Solved

The reflector needs no electrical supply, reducing wiring across the conveyor while the machine receives a discrete event for each separated carton that interrupts the beam.

Retro-reflective PNP 1,000 Hz

2. Monitoring accumulation at a transfer point

At a conveyor transfer, a load that remains between the sensor and reflector holds the received-light signal in the blocked state. The machine controller can use this duration to identify sustained occupancy and regulate upstream release. Complementary PNP outputs provide light and dark switching signals, while the M12 4-pin connector connects the sensor to local machine wiring.

Problem Solved

A sustained beam blockage identifies a transfer position that remains occupied, helping the controller coordinate upstream feeding before additional loads enter the same constrained space.

Complementary PNP M12 4-pin connector Beam interruption

3. Checking opaque sheet continuity

An opaque sheet feeder can direct the returned beam through the expected material path. The sensor detects whether the material continues to block that path, and an opening caused by runout or a break changes its switching state. IP67 protection suits exposed machine mounting, while the visible red beam assists positioning during initial setup.

Problem Solved

A change in the received-light state gives the controller an electrical indication of missing material at the monitoring position, supporting an orderly response to interrupted feed.

IP67 Visible red light Material continuity
Select your currency