1. Measuring conveyor-drive speed
A conveyor drive can couple the encoder shaft to a rotating drive element and send TTL/RS-422 pulses to a compatible counter input. The controller evaluates pulse frequency to calculate rotational speed using the specified 1,024 pulses per revolution. The six-channel incremental interface carries the movement signals through the radial M23 connection.
Problem Solved
Pulse-based rotational feedback helps the controller follow drive speed during production, supporting coordinated conveyor operation without estimating motion solely from the motor command signal.
1,024 pulses/rev
TTL/RS-422
Speed feedback
2. Following a material feed length
A material-feed mechanism can connect the encoder to a calibrated measuring wheel or feed shaft so rotation represents material travel. The A and B incremental signals allow compatible electronics to accumulate movement and determine direction. Known wheel circumference or transmission ratio then converts the pulse count into feed length for a cutting or dispensing sequence.
Problem Solved
Accumulated motion pulses provide a feed-length value for the controller, helping coordinate cut or dispense positions using measured movement rather than relying only on elapsed operating time.
Incremental A/B
1,024 pulses/rev
Feed length
3. Referencing an indexing mechanism
An indexing mechanism can couple the solid shaft to its rotary axis and evaluate incremental movement between machine positions. The reference signal, logically gated with A and B, provides a repeatable rotational reference for compatible control electronics. After establishing the machine reference, the controller tracks subsequent motion through the incremental pulse channels.
Problem Solved
A reference event and incremental movement feedback help the controller coordinate repeated indexing cycles while retaining a defined rotational starting reference for subsequent position calculations.
Reference signal
Servo flange
Incremental feedback