1. Confirming a tote in a loading bay
A loading fixture can aim the sensor toward the expected face of an opaque tote within the specified sensing range. The 270° potentiometer sets reception for that target, and the electrically isolated change-over relay reports detection. A visible red LED provides sensing light, while IP67 protection supports exposed machine mounting.
Problem Solved
A contactless tote-presence signal helps the sequence controller identify an occupied loading position before dispensing or handling proceeds, avoiding a mechanical feeler against the container wall.
5–1,300 mm
270° adjustment
Isolated relay
2. Counting separated cartons at a transfer
A carton conveyor can aim the sensor toward a position crossed by separated opaque cartons. Energetic sensing evaluates light reflected from each carton face, and the isolated relay supplies a light-switching event to compatible control electronics. The 25 Hz switching frequency and response of no more than 20 ms define the available transition timing.
Problem Solved
A discrete optical event marks each separated carton passage, supplying a counting input without a contact arm while preserving electrical isolation through the relay interface.
Energetic sensing
25 Hz
Relay
3. Checking opaque material continuity
A material feeder can direct the sensor at a sheet or strip so reflected light indicates material at the monitored position. A break or runout removes the target from that position and changes the light-switching relay state. The 270° sensitivity potentiometer adapts reception to the installed target and sensing distance.
Problem Solved
A change in local material presence provides an electrical indication of interrupted feed, supporting a coordinated machine response before additional product enters the affected process section.
Diffuse sensing
Light switching
Material continuity