SICK 6013324 VTE18-4N4712 NPN Infrared Diffuse Sensor

USD 87.88

VTE18-4N4712 offers NPN infrared diffuse sensing, 5–350 mm sensing range, 270° adjustment, 250 Hz switching and a 2 m cable.

SKU SICK-6013324 Category
SICK V18

SICK VTE18-4N4712 NPN Infrared Diffuse Sensor

BrandSICK
Model IdentifierVTE18-4N4712
Official Part Number6013324

Technical Overview

The SICK VTE18-4N4712 is an energetic photoelectric proximity sensor with infrared LED illumination and a NPN switching output. It evaluates target-reflected light from one mounting side, avoiding a separate receiver or reflector across the monitored area. The specified sensing range is 5–350 mm, with a maximum of 5–400 mm on a white reference target having 90% remission. Its LED forms a 20 mm at 400 mm spot, and a 270° potentiometer adjusts detection. An L/D control connection selects light or dark switching. Response of no more than 2 ms, 250 Hz switching, 2 m four-wire cable and an IP67 PBT/PC housing support machine integration.

NPN infrared energetic sensor with 5–350 mm sensing, 270° adjustment, selectable light/dark switching and 2 m four-wire cable.

Key Features

  • Energetic photoelectric proximity sensing
  • 5–350 mm sensing range
  • 5–400 mm maximum range on 90% remission white reference
  • Infrared LED; Ø20 mm at 400 mm
  • 270° sensing-range potentiometer
  • NPN output; light/dark selected via L/D control connection
  • Control connection open: light switching
  • Response ≤2 ms; 250 Hz switching
  • Axial M18 × 1 PBT/PC housing; IP67
  • 2 m four-wire cable; 10–30 V DC operation

Detect reflected target light from one mounting side with a PBT/PC M18 sensor and select light/dark NPN output logic through the control connection.

Technical Specification Matrix

ParameterValue
Functional principleEnergetic photoelectric proximity sensor
Sensing range5–350 mm
Maximum sensing range5–400 mm on 90% remission white target (DIN 5033)
Light sourceLED, infrared light
Light spot sizeØ20 mm at 400 mm
Angle of dispersionApproximately 2.8°
AdjustmentPotentiometer, 270°, for sensing range
Optical axisAxial
Housing formCylindrical, M18 × 1
Power supply10–30 V DC; limit values
Residual ripple±10%; remain within supply-voltage limits
Current consumption30 mA without load
Switching outputNPN
Switching modeLight/dark switching, selectable via L/D control connection; control connection open = light switching L.ON
Output current≤100 mA
Response time≤2 ms with resistive load
Switching frequency250 Hz at light/dark ratio 1:1
Connection4-wire, 2 m PVC cable; do not bend below 0 °C
Circuit protectionSupply/input/output reverse-polarity protection, interference suppression and output overcurrent/short-circuit protection
Protection classIII
Housing materialPBT/PC plastic
Optics materialPMMA plastic
IP ratingIP67
Operating temperature−25 to +70 °C
UL fileNMFT2.E175606
Conductor cross-section0.14 mm²
Cable diameterØ5 mm
Dimensions L x W x H (cm)6.36 x 1.8 x 1.8
Physical Weight (kg)0.1

Industrial Applications

1. Checking a workpiece in a fixture

An assembly fixture can position the sensor toward the expected face of an opaque workpiece, with clear optical separation from surfaces behind the detection point. Energetic sensing evaluates reflected target light, and the potentiometer sets reception for the installed geometry. The NPN output supplies the local presence state to the sequence controller.

Problem Solved

A contactless workpiece signal identifies an occupied fixture for the controller, supporting assembly sequencing without a mechanical feeler pressing against the part at the sensing position.

Energetic sensing NPN Potentiometer

2. Counting separated components on a conveyor

A conveyor can aim the sensor at a position crossed by separated opaque parts so each target presents reflected light to the receiver. The 20 mm at 400 mm optical spot defines the monitored region, while the potentiometer adapts reception to the target and background geometry. The 250 Hz switching frequency supports repeated transitions within the documented timing limits.

Problem Solved

Discrete reflected-light transitions mark individual part passages without contact, giving the controller a count input when the installed geometry separates each target from the empty path.

Ø20 mm at 400 mm 250 Hz Diffuse sensing

3. Checking opaque strip continuity

A feeder can direct the sensor toward an opaque strip at a fixed monitoring position so reflected light indicates material present. A break or runout removes the target from that optical position and changes the NPN signal. IP67 protection supports exposed machine mounting, while the 2 m cable connects to local control wiring.

Problem Solved

A change in local material presence provides an electrical indication of interrupted strip feed, helping the controller coordinate a response before additional product enters the affected process section.

Material continuity IP67 NPN
Select your currency