SICK 6011996 IM18-08NNS-ZW1 NPN Inductive Proximity Sensor

USD 41.86

IM18-08NNS-ZW1 provides 8 mm nominal metal sensing, non-flush M18 mounting, 600 Hz switching, NPN NO output and a 2 m PVC cable.

SKU SICK-6011996 Category
SICK IM Standard

SICK IM18-08NNS-ZW1 NPN Inductive Proximity Sensor

BrandSICK
Model IdentifierIM18-08NNS-ZW1
Official Part Number6011996

Technical Overview

The SICK IM18-08NNS-ZW1 is an M18 inductive proximity sensor with an NPN normally open output and DC three-wire wiring. Its electromagnetic sensing principle detects metal targets without requiring an optical path or separate reflector. The nominal sensing range is 8 mm; the actual target material, geometry and installed gap must be qualified. The non-flush mounting arrangement and M18 × 1 threaded nickel-plated brass housing define installation in the machine fixture. The sensor provides 600 Hz switching and operates from 10–30 V DC, with a 2 m three-wire PVC cable, a plastic sensing face and IP67 protection.

Non-flush M18 inductive sensor with 8 mm nominal range, NPN normally open output, 600 Hz switching and 2 m three-wire PVC cable.

Key Features

  • Inductive proximity sensing for metal targets
  • 8 mm nominal sensing range
  • Non-flush installation; M18 × 1 threaded housing
  • NPN normally open output; DC three-wire wiring
  • 600 Hz switching frequency
  • 10–30 V DC operation; ≤10% residual ripple
  • Continuous output current ≤400 mA
  • Nickel-plated brass housing; plastic sensing face
  • IP67; −25 to +70 °C operating range
  • 2 m three-wire PVC cable

Detect nearby metal targets without contact using non-flush M18 mounting and an NPN normally open switching signal.

Technical Specification Matrix

ParameterValue
Functional principleInductive proximity sensing of metal targets
Housing formMetric cylindrical, standard design
Thread sizeM18 × 1
Housing diameter18 mm
Nominal sensing range Sn8 mm
Installation typeNon-flush
Switching frequency600 Hz
Switching outputNPN
Output functionNormally open (NO)
Electrical wiringDC 3-wire
ConnectionCable, 3-wire, 2 m
Power supply10–30 V DC
Residual ripple≤10%
Voltage drop≤1 V at maximum output current
Time delay before availability≤100 ms
Hysteresis2–10%
Reproducibility≤2% of Sr at constant supply and ambient temperature
Temperature drift±10% of Sr
Continuous output current≤400 mA
Housing materialBrass, nickel-plated
Sensing face materialPlastic
Housing length50 mm
Thread length32 mm
Maximum tightening torque30 Nm
IP ratingIP67 according to EN 60529
Operating temperature−25 to +70 °C
EMCEN 60947-5-2
Shock and vibration resistance30 g, 11 ms / 10–55 Hz, 1 mm
Cable jacket materialPVC
Conductor cross-section0.34 mm²

Industrial Applications

1. Confirming a metal part in a fixture

A machining fixture can place the sensor beside the expected location of a metal part so the target enters its qualified sensing zone when seated. Non-flush installation requires the sensing end to project beyond the surrounding mounting surface, and the NPN normally open output provides the presence signal. Actual target material and geometry must be qualified for the installed gap.

Problem Solved

A contactless metal-presence signal helps the sequence controller identify an occupied fixture position before the next operation, avoiding a mechanical feeler pressing against the seated part.

Non-flush mounting NPN NO Metal presence

2. Counting metal tabs on a rotating mechanism

A rotating mechanism can present separated metal tabs to the M18 sensing face and count each normally open output transition. The 600 Hz switching frequency supports repeated passages within the documented limits. Tab geometry, spacing, operating gap and target material must be qualified so consecutive targets produce distinct switching events.

Problem Solved

Discrete tab passages provide the controller with a pulse count related to mechanism rotation, supporting cycle counting without an optical beam or contacting follower on the moving tabs.

600 Hz Inductive NPN NO

3. Confirming a shuttle at a transfer position

A shuttle can carry a metal flag that enters the sensor’s local detection zone at a transfer position. The M18 thread supports fixed installation, while the normally open NPN signal reports the flag state. IP67 protection and the nickel-plated brass body support exposed machine placement.

Problem Solved

A local position-confirmation signal helps the controller coordinate transfer sequencing when the metal flag reaches the monitored point, without a mechanical switch actuator following each shuttle movement.

M18 thread IP67 Metal flag
Select your currency