SICK 1046010 KT6W-2N5116 RGB NPN Contrast Sensor

USD 223.60

KT6W-2N5116 combines RGB illumination, static two-point teach-in, NPN output, 5 kHz switching and an M12 four-pin connector in an IP67 metal housing.

SKU SICK-1046010 Category

Out of stock

SICK KT6

SICK KT6W-2N5116 RGB NPN Contrast Sensor

BrandSICK
Model IdentifierKT6W-2N5116
Official Part Number1046010

Technical Overview

The SICK KT6W-2N5116 is an RGB contrast sensor with an NPN switching output for distinguishing a taught mark from its background. Static two-point teach-in automatically selects the emitted light, places the threshold between the two received signals and defines light/dark behavior through the teach sequence. The specified sensing distance is up to 10 mm with ±3 mm tolerance. A 1.5 × 6.5 mm spot is oriented vertically relative to the long housing side, with emission from the short device side. The sensor provides 5 kHz switching, 100 µs response, an M12 four-pin connector and an IP67 zinc-diecast housing for machine integration.

RGB contrast sensor with static two-point teach-in, NPN output, up to 10 mm sensing distance, 5 kHz switching and an M12 four-pin connector.

Key Features

  • RGB LED contrast sensing; 640, 525 and 470 nm
  • Sensing distance ≤10 mm with ±3 mm tolerance
  • 1.5 × 6.5 mm spot, vertical to the long housing side
  • Light emission from the short device side
  • Static two-point teach-in using the local button
  • Automatic emitted-light selection and midpoint threshold
  • NPN output; 100 mA maximum output current
  • 5 kHz switching; 100 µs response
  • 10–30 V DC supply and M12 four-pin male connector
  • IP67 zinc-diecast housing; 400 g product weight

Teach the mark and background to select the emitted color and switching threshold automatically for an NPN contrast-detection signal.

Technical Specification Matrix

ParameterValue
Functional principleOptical contrast detection
Housing designMiddle
Light sourceLED, RGB
Wavelengths640 nm, 525 nm and 470 nm
Light emissionShort device side
Light spot size1.5 × 6.5 mm
Light spot directionVertical relative to the long side of the housing
Sensing distance≤10 mm; tolerance ±3 mm
AdjustmentTeach-in button
Teach-in modeStatic two-point teach-in
Teach-in behaviorAutomatic optimum emitted-light selection; threshold centered between background and mark; teach sequence defines light/dark switching
Power supply10–30 V DC; short-circuit-protected network max. 8 A
Residual ripple≤5 Vpp; remain within supply tolerances
Current consumption<40 mA without load
Switching frequency5 kHz at light/dark ratio 1:1
Response time100 µs
Switching outputNPN
NPN output voltageHIGH approximately supply voltage; LOW ≤2 V
Output current100 mA maximum
Retention time ET25 ms; non-volatile memory
Time delayNone
ConnectionMale connector M12, 4-pin
Pin assignment1/BN: L+; 2/WH: not connected; 3/BU: M; 4/BK: Q
Protection classII; reference voltage 32 V DC
Circuit protectionSupply reverse-polarity protection, output Q short-circuit protection and interference-pulse suppression
Housing materialZinc diecast
IP ratingIP67
Operating temperature−10 to +55 °C
Storage temperature−25 to +75 °C
Shock resistanceAccording to IEC 60068
Dimensions L x W x H (cm)8 x 3.04 x 5.3
Physical Weight (kg)0.4

Industrial Applications

1. Registering a printed packaging web

A packaging web can carry a contrasting registration mark past the sensor at the specified sensing distance. Static two-point teach-in sets the mark and background conditions, after which each qualified optical transition provides a switching event. The 5 kHz switching frequency and 100 µs response define timing limits for the machine controller to evaluate during commissioning.

Problem Solved

A qualified print-mark event gives the controller a repeatable optical reference for web positioning, helping coordinate the feed cycle with printed artwork after actual material contrast has been tested.

Print registration 5 kHz Contrast sensing

2. Checking a printed label at an inspection point

A label-handling station can direct the light spot at a designated printed patch while the label is held in a controlled position. Static two-point teach-in sets the mark and background conditions. A compatible controller reads the NPN switching signal to distinguish the qualified printed patch from the exposed background at that local inspection point.

Problem Solved

A local contrast check identifies whether the expected printed patch is present at the inspection point, allowing the controller to flag missing or misplaced labels without mechanical contact.

Label inspection NPN Printed patch

3. Indexing contrasting sections on a rotary carrier

A rotary carrier can present alternating light and dark reference patches to the sensor while keeping the surface within the specified sensing distance. Each qualified transition changes the NPN output for the local control input. The documented response time limits detection latency, and the IP67 housing supports installation near the machine mechanism.

Problem Solved

Contrasting reference patches provide discrete angular indexing events for a compatible controller, helping identify expected carrier positions without a contact cam switch at the monitored surface.

Rotary indexing NPN IP67
Select your currency