SICK 1078111 KTX-WB9114125UZZZZ RGB Analog Contrast Sensor

USD 492.70

KTX-WB9114125UZZZZ combines RGB contrast sensing, push-pull PNP/NPN and 0–10 V outputs, multiple teach modes and an M12 five-pin connector.

SKU SICK-1078111 Category
SICK KTX Prime

SICK KTX-WB9114125UZZZZ RGB Analog Contrast Sensor

BrandSICK
Model IdentifierKTX-WB9114125UZZZZ
Official Part Number1078111

Technical Overview

The SICK KTX-WB9114125UZZZZ is an RGB contrast sensor with TwinEye technology, a push-pull PNP/NPN switching output and a separate 0–10 V analog output. Its long-side light emission forms a 0.9 × 3.8 mm spot oriented vertically relative to the long housing side, with a specified sensing distance up to 13 mm and ±5 mm tolerance. One-point, two-point, dynamic and auto teach modes adapt setup; the display and navigation buttons support adjustment. Switching reaches 50 kHz, with a 16 kHz limit in one-point color mode. The sensor provides 10 µs response, an M12 five-pin connector and an IP67 VISTAL housing.

RGB TwinEye contrast sensor with long-side emission, push-pull PNP/NPN and 0–10 V outputs, up to 13 mm sensing distance and M12 five-pin connector.

Key Features

  • RGB LED illumination at 470, 525 and 625 nm; TwinEye technology
  • Sensing distance ≤13 mm with ±5 mm tolerance
  • Long device-side emission; 0.9 × 3.8 mm vertical spot
  • One-point, two-point, dynamic and auto teach modes
  • Push-pull PNP/NPN switching output
  • Separate 0–10 V analog voltage output
  • 50 kHz switching; 16 kHz in one-point color mode
  • 10 µs response; jitter 5 µs, or 15 µs in one-point color mode
  • Local display/navigation buttons; M12 five-pin connector
  • IP67 VISTAL housing with COP optics; 94 g product weight

Provide a contrast-switching signal and a separate 0–10 V analog signal while selecting the teach mode through local display controls.

Technical Specification Matrix

ParameterValue
Functional principleOptical contrast detection
Parameter presettingsNone
Special applicationsStandard
Device typeStandard
Housing designLarge
Light sourceLED, RGB
TwinEye technologyYes
Wavelengths470 nm, 525 nm and 625 nm
Light emissionLong device side
Light spot size0.9 × 3.8 mm
Light spot directionVertical relative to long side of housing
Receiving filterNone
Sensing distance≤13 mm; tolerance ±5 mm
Teach-in modesOne-point, two-point, dynamic teach-in and auto mode
Factory teach settingTwo-point teach-in
AdjustmentDisplay and navigation buttons
Teach-in behaviorAutomatic optimum RGB light selection; static teach sequence defines light/dark logic; dynamic output active on mark if background is in the field longer during teaching
Switching modeLight/dark switching
Digital output Q11 push-pull PNP/NPN output
Analog output QA1 voltage output, 0–10 V
Digital input In11
Power supply10.8–28.8 V DC; short-circuit-protected network max. 8 A
Residual ripple≤5 Vpp; remain within supply tolerances
Current consumption<100 mA without load
Switching frequency50 kHz at light/dark ratio 1:1; one-point color mode 16 kHz
Response time10 µs
Jitter5 µs; one-point color mode 15 µs
Switching outputPush-pull PNP/NPN
Output voltageHIGH = supply minus 3 V; LOW ≤3 V
Output current100 mA maximum, total of all outputs
Input thresholdsET teach, AT blanking, F/C coarse and L/D light each listed at 10 V≤U<supply voltage
Retention time ET25 ms; non-volatile memory
ConnectionM12 five-pin plug
Pin assignment1/BN: L+; 2/WH: analog voltage QA; 3/BU: M; 4/BK: Q; 5/GY: IN
Protection classIII
Circuit protectionSupply reverse-polarity protection, output Q short-circuit protection and interference-pulse suppression
Housing materialVISTAL
Optics materialCOP
IP ratingIP67
Operating temperature−20 to +60 °C
Storage temperature−25 to +75 °C
Shock resistanceIEC 60068-2-27; 30 g for 11 ms
MTTFD291 years
UL fileE181493
Dimensions L x W x H (cm)7.85 x 3 x 5.3
Physical Weight (kg)0.094

Industrial Applications

1. Registering a printed packaging web

A packaging web can carry a contrasting registration mark past the sensor at the specified sensing distance. Two-point or dynamic teach-in establishes the mark and background conditions, after which each qualified optical transition provides a switching event. The specified mode-dependent switching frequency and 10 µs response define timing limits for the machine controller to evaluate during commissioning.

Problem Solved

A qualified print-mark event gives the controller a repeatable optical reference for web positioning, helping coordinate the feed cycle with printed artwork after actual material contrast has been tested.

Print registration 50 kHz maximum Contrast sensing

2. Checking a printed label at an inspection point

A label-handling station can direct the light spot at a designated printed patch while the label is held in a controlled position. Two-point or dynamic teach-in establishes the mark and background conditions. A compatible controller reads the Push-pull PNP/NPN switching signal to distinguish the qualified printed patch from the exposed background at that local inspection point.

Problem Solved

A local contrast check identifies whether the expected printed patch is present at the inspection point, allowing the controller to flag missing or misplaced labels without mechanical contact.

Label inspection Push-pull PNP/NPN Printed patch

3. Indexing contrasting sections on a rotary carrier

A rotary carrier can present alternating light and dark reference patches to the sensor while keeping the surface within the specified sensing distance. Each qualified transition changes the Push-pull PNP/NPN output for the local control input. The documented response time limits detection latency, and the IP67 housing supports installation near the machine mechanism.

Problem Solved

Contrasting reference patches provide discrete angular indexing events for a compatible controller, helping identify expected carrier positions without a contact cam switch at the monitored surface.

Rotary indexing Push-pull PNP/NPN IP67
Select your currency