SICK 6051011 CQ4-08ENSKU1 Capacitive Proximity Sensor

USD 159.64

CQ4-08ENSKU1 provides capacitive proximity sensing, NPN normally open output, 100 Hz switching and IP67 protection with adjustable sensitivity.

SKU SICK-6051011 Category
SICK CQ

SICK CQ4-08ENSKU1 Capacitive Proximity Sensor

BrandSICK
Model IdentifierCQ4-08ENSKU1
Official Part Number6051011

Technical Overview

The SICK CQ4-08ENSKU1 is a rectangular capacitive proximity sensor with a NPN normally open output. It detects changes in capacitance caused by nearby material, supporting qualified detection of metal and nonmetal targets. Its specified sensing range is 1–8 mm non-flush or 1–6 mm flush; actual reach depends on the material and installation. A five-turn sensitivity potentiometer sets sensitivity for the application. The sensor operates from 10–30 V DC with 100 Hz switching and connects through a 2 m three-wire PVC cable. Its ABS housing provides IP67 protection according to EN 60529. Material reduction factors and an empty/full or target/background test guide commissioning.

Capacitive proximity sensor with NPN normally open output, 1–8 mm non-flush or 1–6 mm flush sensing, five-turn sensitivity potentiometer and 2 m three-wire PVC cable.

Key Features

  • Rectangular capacitive proximity sensing for qualified metal and nonmetal targets
  • 1–8 mm non-flush or 1–6 mm flush specified sensing range
  • NPN normally open output
  • Five-turn sensitivity potentiometer
  • 10–30 V DC operating supply
  • 100 Hz switching
  • 2 m three-wire pvc cable
  • IP67 according to EN 60529; ABS housing
  • Material-dependent sensing distance; reference reduction factors documented

Detect qualified metal or nonmetal material with adjustable capacitive sensing and a discrete switching signal for machine control.

Technical Specification Matrix

ParameterValue
Functional principleCapacitive proximity sensing
Housing designRectangular
Sensing range1–8 mm non-flush or 1–6 mm flush
Assured sensing distance5.76 mm
InstallationFlush or non-flush; observe respective sensing ranges
Material reduction factorsReference values, material dependent: metal 1; water 1; PVC approximately 0.4; oil approximately 0.25; glass 0.6; ceramics 0.5; alcohol 0.7; wood 0.2–0.7
AdjustmentFive-turn sensitivity potentiometer
Switching outputPnp normally open
Electrical wiringDC, 3-wire
Switching frequency100 Hz
Power supply10–30 V DC
Residual ripple≤10%
Voltage drop≤2.5 V DC at maximum output current
Current consumption12 mA without load
Initialization time≤200 ms
Output current≤150 mA
Reproducibility≤5% of sensing range at constant supply voltage and ambient temperature
Temperature drift±20% of sensing range
Short-circuit protectionYes
Connection2 m three-wire pvc cable
Cable materialPVC; do not bend below 0 °C
Housing materialABS plastic
Sensing face materialPlastic
IP ratingIP67 according to EN 60529
Operating temperature−20 to +75 °C
Shock resistance30 g for 11 ms
Vibration resistance10–55 Hz at 1 mm amplitude
EMCEN 60947-5-2
MTTFD1,344 years
Diagnostic coverage DCavg0%
Mission time20 years
UL fileNRKH.E191603
Hysteresis4–20% of sensing range; varies with installation, environment and sensitivity
Power-up pulse suppressionYes
Items suppliedOne screwdriver for potentiometer adjustment
Storage temperature−40 to +85 °C
Housing width16 mm
Housing depth12 mm
Pin assignmentBN: L+; BK: Q; BU: M
MountingTwo M3 threaded holes; cable-tie mounting shown in dimensional drawing
IndicatorsGreen power LED; yellow object/medium detection LED

Industrial Applications

1. Checking a nonmetal part in an assembly fixture

An assembly fixture can place a qualified nonmetal part near the sensing face and use the NPN normally open signal to confirm its local presence. The five-turn sensitivity potentiometer adapts sensitivity to the actual target and surrounding fixture. Commissioning compares empty and occupied states at the installed spacing, taking the documented material reduction factors into account.

Problem Solved

A local presence signal helps the controller detect a missing part before the next assembly step, without requiring a metal target on the component or a contact actuator.

Part presence Nonmetal targets Capacitive sensing

2. Detecting a liquid at a point in a nonmetal vessel

A suitable nonmetal vessel can position the sensor outside its wall at the desired detection point. After testing the actual wall, liquid and spacing, the five-turn sensitivity potentiometer sets a threshold between empty and filled conditions. The NPN normally open output provides a discrete point-level event to a compatible controller; the specified range remains subject to the installed materials.

Problem Solved

A qualified external point-level signal helps the process controller identify liquid reaching the monitored height while avoiding a probe inside the vessel and preserving the vessel wall.

Point level External mounting Qualified vessel wall

3. Monitoring granulate at a feed inspection window

A granulate feeder can place the sensor beside a suitable nonmetal inspection window to check whether material occupies the monitored location. The five-turn sensitivity potentiometer is set using the actual granulate, window and installation spacing. Empty and filled tests, including expected moisture and buildup conditions, qualify the discrete output before it is used to coordinate feeding.

Problem Solved

A local material-presence event helps the controller identify an empty feed location or arrival of replenishment material, supporting feed sequencing without placing a mechanical paddle in the granulate.

Granulate feed Material presence Threshold setup
Select your currency