SICK 6058650 WFS3-40B41CA70 IO-Link Label Fork Sensor

USD 89.44

Infrared label detection with a 3 mm fork, 42 mm depth, IO-Link V1.1, time measurement + debouncing, 15 kHz switching and an M8 four-pin connector.

SKU SICK-6058650 Category
SICK WFS

SICK WFS3-40B41CA70 IO-Link Infrared Label Fork Sensor

BrandSICK
Model IdentifierWFS3-40B41CA70
Official Part Number6058650

Technical Overview

The SICK WFS3-40B41CA70 is an infrared optical fork sensor for label and carrier-gap detection with a push-pull PNP/NPN switching output and IO-Link V1.1. Its 3 mm fork opening and 42 mm fork depth support installation around a guided label web. The minimum label size and gap are 2 mm, depending on label thickness. One-point, two-point or dynamic teaching adapts the threshold, while IO-Link provides two switching signals, measurement and teaching feedback. This version includes time measurement + debouncing. The sensor combines 15 kHz switching, response no greater than 46 µs, an M8 four-pin male connector and an IP65 glass-fiber-reinforced PA housing for machine integration.

Infrared label fork sensor with 3 mm opening, 42 mm depth, IO-Link and time measurement + debouncing, 15 kHz switching and M8 four-pin male connector.

Key Features

  • Infrared LED optical label and carrier-gap detection
  • 3 mm fork opening and 42 mm fork depth
  • Minimum label size/gap 2 mm, depending on label thickness
  • One-point, two-point and dynamic teach-in
  • IO-Link V1.1; 2.3 ms cycle time
  • Smart Task: Time measurement + debouncing
  • 15 kHz switching; response ≤46 µs and ±20 µs response-time stability
  • M8 four-pin male connector
  • Selectable IO-Link off-delay settings from 0 to 520 ms
  • IP65 glass-fiber-reinforced PA housing; −20 to +60 °C operation

Teach separate label and web-presence thresholds, then use IO-Link switching and measurement data to combine feed detection with web-break monitoring.

Technical Specification Matrix

ParameterValue
Functional principleOptical label and carrier-gap detection
Light sourceLED, infrared light
Label detectionYes
Fork opening3 mm
Fork depth42 mm
Minimum detectable objectLabel gap / label size: 2 mm, depending on label thickness
AdjustmentTeach-in button and cable; teaching, sensitivity, light/dark switching and key lock
Teach-in modeOne-point, two-point and dynamic teach-in
IndicatorsYellow switching-output/function LED; green function LED
Power supply10–30 V DC
Residual ripple<10%
Current consumption20 mA without load
Initialization time40 ms
Switching frequency15 kHz
Response time≤46 µs
Response-time stability±20 µs
Jitter17 µs
Switching outputPush-pull PNP/NPN
Switching modeLight/dark switching
Output current100 mA maximum
Teach inputTeach: 5 V<U<supply voltage; run: U<4 V
Protection classIII
Circuit protectionSupply reverse-polarity protection, output Q short-circuit protection and interference-pulse suppression
ConnectionM8 four-pin male connector
Pin assignment1/BN: L+; 4/BK: Q1/C; 2/WH: multifunction; 3/BU: M
Housing materialGlass-fiber-reinforced PA
IP ratingIP65
Operating temperature−20 to +60 °C
Storage temperature−30 to +80 °C
Ambient light immunity≤10,000 lx
Shock resistanceAccording to EN 60068-2-27
MTTFD97 years
Diagnostic coverage DCavg0%
UL fileNRKH.E191603
IO-LinkV1.1; cycle time 2.3 ms
Vendor ID26
Device IDHEX 8000AF; DEC 8388783
Smart TaskTime measurement + debouncing
Output voltagePush-pull HIGH: supply voltage minus a drop <2 V; LOW ≤2 V
Time delayIO-Link adjustable switch-off delay: 0 / 8 / 16 / 32 / 65 / 130 / 260 / 520 ms; default 0 ms
Second thresholdTeach Q1 for label versus carrier and Q2 for carrier versus empty fork; read Q1/Q2 in IO-Link or configure pin 2 for Q2
Process data layouts A/BA: bits 0/1 QL1/QL2; B: bit 0 QL1, bit 1 Quality of Run Alarm; both bit 2 unused, bit 3 teach busy, bits 4–15 empty
Process data layouts C/DC: bits 0/1 QL1/QL2; D: bit 0 QL1, bit 1 Quality of Run Alarm; both bit 2 unused, bit 3 teach busy, bits 4–5 empty, bits 6–15 measuring value
Process data layout EBits 0/1: AFC Q1/Q2 outputs; bits 2–15: time measurement value
Dynamic teach procedureHold teach button 3–20 s while moving at least three label/carrier repeats; yellow flashes at 3 Hz
Fine adjustmentPress/release button within 10 s after teaching to move threshold toward taught object
Key lockHold teach button >30 s to lock or unlock
Dimensions L x W x H (cm)6.43 x 1 x 2.5

Industrial Applications

1. Registering a label feed at the dispenser

A label applicator can guide its web through the 3 mm fork opening near the dispensing point and use each label-to-carrier transition as a feed reference. Teaching sets the optical threshold for the selected label stock. The 42 mm fork depth and thickness-dependent 2 mm minimum label/gap specification define the mechanical and material limits for this installation.

Problem Solved

A qualified label transition supplies a feed-position reference to the machine controller, helping align each dispensing cycle with the next label while the web remains mechanically guided.

Label registration 3 mm opening 15 kHz

2. Detecting a carrier-web break

A labeling machine can teach Q1 to distinguish label from carrier and Q2 to distinguish carrier material from an empty fork. SICK documents this two-threshold arrangement for IO-Link WFS sensors. The controller reads both signals in the process data, or configures pin 2 for Q2 while pin 4 reports Q1.

Problem Solved

The second threshold distinguishes missing carrier from a normal inter-label gap, giving the controller a separate web-break indication while label detection continues through the first threshold.

Two thresholds Q1 / Q2 IO-Link

3. Monitoring a configured label-event duration

A converting machine can configure the sensor’s time-measurement Smart Task and read its time value through IO-Link process layout E. Label and carrier transitions provide the optical events for the configured measurement. The controller can compare the resulting value with its commissioned timing window while the debouncing function conditions the selected signal.

Problem Solved

A reported event-duration value gives the controller a timing reference for detecting changes in the commissioned label sequence, while configured debouncing helps suppress unwanted transitions in that signal.

Time measurement Debouncing Process layout E
Select your currency