SICK 1047401 DL50-N1123 NPN 4–20 mA Reflector Sensor

USD 682.24

DL50-N1123 measures0.2–50 m on Diamond Grade reflective tape,with one NPN output,4–20 mA analog signal,16-bit output resolution and IP65 protection.

SKU SICK-1047401 Category
Laser Distance Sensors - SICK Dx50

SICK DL50-N1123 NPN Analog Reflector Distance Sensor

BrandSICK
Model IdentifierDL50-N1123
Official Part Number1047401

Technical Overview

The SICK DL50-N1123 measures distance to Diamond Grade reflective tape over 200–50,000 mm using a class 1 red time-of-flight laser. One NPN switching output supplies a taught distance condition,while a 4–20 mA analog output passes distance information to external control. The analog output has 16-bit resolution and supports teach-in,scaling and inversion. Fast/slow averaging gives specified15/30 ms response for lateral target entry;output time is≥4 ms for continuous distance change. An LC display,two LEDs and a laser-off/external-teach input support setup. The IP65 zinc-diecast sensor uses an M12 five-pin male connector and requires warm-up of up to fifteen minutes.

200–50,000 mm reflector distance sensor for Diamond Grade tape,with one NPN output,one4–20 mA analog output and M12 five-pin connection.

Key Features

  • 200–50,000 mm measuring range on Diamond Grade reflective tape
  • 658 nm class1 red laser;typical15 ×15 mm spot at10 m
  • One NPN digital output;maximum current≤100 mA
  • One4–20 mA analog output;load≤300 Ω;16-bit output resolution
  • Teach-in,scaling and inversion of analog/digital outputs
  • Fast/slow averaging;15/30 ms lateral-entry response
  • Output time≥4 ms for continuous distance change
  • Distance-to-object switching;10–1,000 mm hysteresis;laser-off/teach input
  • LC display,two LEDs and M12 five-pin male connector
  • IP65 zinc-diecast housing;−30 to+65 °C operation;warm-up≤15 min

Measure the position of a reflector-equipped assembly and send analog distance information plus a taught switching condition to external machine control.

Technical Specification Matrix

ParameterValue
Functional principleTime-of-flight laser distance evaluation
TargetReflector;Diamond Grade reflective tape required for stated range
Measuring range200–50,000 mm on Diamond Grade reflective tape
Repeatability≥2 mm;1σ;depends on fast/slow averaging
AveragingFast or slow
Response time15/30 ms,depending on fast/slow averaging;lateral target entry
Light sourceVisible red laser;658 nm
Laser class1;IEC60825-1:2014 and EN60825-1:2014
Laser pulse figuresMaximum output120 mW;pulse2.5 ns;duty cycle1/400
Laser handlingDo not intentionally look into the beam or point it at eyes
Typical light spot15 ×15 mm at10 m
Average laser service life100,000 h at25 °C
Digital outputs1 ×NPN;maximum output current≤100 mA;short-circuit protected
Switching modesDistance to object(DtO)
Output adjustmentTeach-in,scaling and inversion of digital and analog outputs
Hysteresis10–1,000 mm
Multifunction inputLaser off,external teach or deactivated;input response≤15 ms
Other functionsSwitch-off display,reset,lock user interface
Power supply10–30 V DC;limit values;reverse-polarity protected
Supply network requirementShort-circuit protected network,max8 A
Power consumption≤2.1 W without load
Supply ripple≤5 Vpp;must remain within supply limits
Initialization time≤250 ms
Warm-up time≤15 min
Indicators and displayLC display and2LEDs
ConnectionM12 five-pin male connector
Pin assignment1BN=L+;3BU=M;4BK=Q digital;2WH=QA analog;5GY=MF
Housing materialZinc diecast
Window materialPMMA plastic
IP ratingIP65
Protection classIII
Operating temperature−30 to+65 °C
Storage temperature−40 to+75 °C
Relative humidity≤95%;non-condensing
Ambient light immunityTypical40,000 lx
Vibration resistanceEN60068-2-6 and EN60068-2-64
Shock resistanceEN60068-2-27
MTTFD101 years
DCavg0%
Physical Weight (kg)0.2
Dimensions L x W x H (cm)5.77 x 3.61 x 7.27
Resolution1 mm;manufacturer1000 µm equals1 mm
Measurement accuracy±7 mm
Analog output1 ×4–20 mA;load≤300 Ω
Analog-output resolution16 bit
Output time≥4 ms;continuous change of distance

Industrial Applications

1. Providing rail-carriage position feedback

A rail carriage can carry Diamond Grade reflective tape facing the stationary sensor over the permitted200–50,000 mm path. The4–20 mA output passes distance information to an external positioning controller,which applies the installed scaling and correction strategy. Reflector alignment,averaging,warm-up and the≤300 Ω input load are checked throughout the intended travel.

Problem Solved

Analog reflector-distance feedback gives external positioning control a numerical reference along the carriage travel,supporting correction between discrete position events while retaining the external controller as the motion-control element.

Rail position Analog feedback Reflector

2. Following a reflector-equipped dancer position

A material-handling line can mount the required reflective tape on a dancer assembly so its movement changes the measured optical path. Within the stated range,the analog signal passes position information to external feed control. The controller relates distance to the installed dancer geometry and implements feed correction;reflector alignment and averaging are validated over the expected movement.

Problem Solved

A continuous dancer-position reference lets external feed control assess displacement from the desired position,supporting material-loop or tension coordination across a taught span instead of relying only on a fixed threshold.

Dancer position External feed control Analog span

3. Checking a lift-platform transfer position

A lift platform can carry Diamond Grade reflective tape aligned with the sensor and use the analog distance signal for external position evaluation. The single NPN output is taught to report a selected transfer-height condition. Actual platform travel,reflector visibility,hysteresis and warm-up are validated before external sequence control uses that condition to coordinate the next handling step.

Problem Solved

An analog position reference combined with a taught switching condition gives external lift control information for following travel and coordinating a transfer event at the selected platform height.

Lift position Switching condition External sequence
Select your currency