1. Counting separated opaque products
A conveyor can align the sensor with a PL80A reflector across a path carrying separated opaque products. Each product interrupts the returned laser beam and changes the PNP and NPN signals for external counting logic. Setup checks beam coverage, product gaps and actual head-to-reflector spacing within the specified 0–600 mm maximum range, while the fixed focus and fixed sensitivity require checking the installed beam geometry.
Problem Solved
A blocked-versus-clear reflector return supplies external counting logic with a product-passage reference, helping track throughput without relying on light reflected by changing product surface finishes.
Opaque products
Reflector return
External counting
2. Monitoring an opaque web for a break
A material feeder can route an opaque web between the sensor and a reflector so the normal material blocks the returned laser beam. A break exposes the reflector and changes the output states for external feeder control. Installation establishes adequate material width, flutter tolerance and beam coverage; the typical 0.8 mm spot at 300 mm is checked at the actual operating distance.
Problem Solved
A blocked-to-clear return transition gives external feeder control a possible web-break reference, helping recognize missing material before downstream processing continues without its expected opaque feed.
Web continuity
Laser return
Opaque material
3. Recognizing a blocked conveyor transfer
A transfer station can place the sensor and reflector across an expected load location. A load remaining in the laser path maintains the interrupted-return condition, while external control evaluates its duration using a separate dwell timer. The machine controller uses the chosen PNP or NPN signal and light/dark selection to coordinate upstream release after the transfer position clears.
Problem Solved
Sustained interruption provides external transfer control with an occupancy indication, helping coordinate load release when a station remains blocked instead of assuming that every passing signal represents a cleared position.
Transfer occupancy
External dwell timer
PNP/NPN signals