| Functional principle | Transparent-object photoelectric retro-reflective sensing; polarized coaxial/autocollimation optics |
| Sensing range | 0–4 m with PL80A reflector |
| Maximum sensing range | 0–4 m |
| Reflector minimum distance | No minimum distance with coaxial optics |
| Polarization filter | Yes |
| Light source | Visible red PinPoint LED |
| Wavelength | 660 nm |
| Light spot size | Typically Ø25 mm at 1.5 m |
| LED service life | Average 100,000 h at ambient +25 °C |
| Adjustment | IO-Link and single teach-in button |
| AutoAdapt | Yes |
| Attenuation along light beam | >8% |
| Digital output | PNP; maximum output current ≤100 mA |
| Switching mode | Light/dark switching |
| Pin 2 configuration | Configurable external input, teach-in input, sender-off input, detection output, logic output or device contamination alarm output |
| Pin assignment | 1 BN=L+; 3 BU=M; 4 BK=QL1/C; 2 WH=MF (CD-273/CD-367) |
| Pin 4 connection restriction | This switching output must not be connected to another output |
| Signal voltage PNP HIGH/LOW | Approximately supply voltage −2.5 V / 0 V |
| Switching frequency | 1,500 Hz at 1:1 light/dark ratio |
| Configured pin 2 response time | 200–300 µs with resistive load; valid for switching output on pin 2 if configured with software |
| Configured pin 2 repeatability | 100 µs; valid for switching output on pin 2 if configured with software |
| Configured pin 2 frequency | ≤1,500 Hz at 1:1 light/dark ratio; valid for switching output on pin 2 if configured with software |
| IO-Link | V1.1; COM2 at 38.4 kBaud; compatible master port type A; SIO supported |
| IO-Link cycle time | 2.3 ms |
| IO-Link process data | 16 bits: bit 0 QL1; bit 1 QL2; bits 2–15 measuring value (timestamp) |
| IO-Link identifiers | VendorID 26; DeviceID 0x8000F5 / 8388853 |
| Smart Task | Timestamp + debouncing |
| Logic functions | Direct, AND, OR, WINDOW and hysteresis; inverter available |
| Timer functions | Deactivated, switch-on delay, off-delay, on-and-off delay or impulse (one-shot) |
| Smart Task response time | SIO Direct: 300–450 µs without internal logic/timing; SIO Logic: 550–650 µs with internal logic/timing and Automation Functions |
| Maximum debounce time | 52 ms in SIO Logic or IO-Link operation |
| Timestamp buffer and range | IO-Link: 8 timestamps; maximum range 260 ms |
| Diagnostics | Device status; quality of teach; quality of run with contamination display |
| Function compatibility | Functions compatible with WL12GC-3P2472A91 |
| Power supply | 10–30 V DC; operate in short-circuit protected supply network, maximum 8 A |
| Current consumption | 30 mA without load |
| Residual ripple | <5 Vpp; remain within supply limits |
| Protection class | III |
| Circuit protection | A: supply reverse-polarity protection; B: inputs and output reverse-polarity protection; C: interference suppression; D: outputs protected against overcurrent and short circuits |
| Housing design | Rectangular |
| Housing material | Metal, zinc diecast |
| Front screen | PMMA plastic |
| Connection | Male M12 four-pin connector |
| Mounting provisions | M4 threaded mounting hole, 4 mm depth; Ø4.2 mm mounting hole |
| IP rating | IP66/IP67 |
| Operating temperature | −40 to +60 °C |
| Storage temperature | −40 to +75 °C |
| MTTFD | 891 years |
| DCavg | 0% |
| Mission time | 20 years |
| Physical Weight (kg) | 0.12 |