SICK 6052367 PNP Through-beam Photoelectric Sensor Pair

USD 113.62

WS/WE100-2P3439 offers 0–20 m sensing, 632 nm red LED light, adjustable sensitivity, selectable PNP switching and M8 three-pin connection.

SKU SICK-6052367 Category
SICK W100-2

SICK WS/WE100-2P3439 Through-beam Photoelectric Sensor Pair

BrandSICK
Model IdentifierWS/WE100-2P3439
Official Part Number6052367

Technical Overview

The SICK WS/WE100-2P3439 is a through-beam photoelectric sensor pair with separate sender and receiver units. Its 632 nm red LED provides 0–20 m sensing and 0–33 m maximum range, with an 850 mm light spot at 12 m. A 270° sensitivity potentiometer adjusts the receiver condition, and a rotary switch selects light or dark operation for the PNP output. Response is no more than 0.5 ms with resistive load, with 1,000 Hz switching at a 1:1 light/dark ratio. Each rectangular unit uses an ABS/PC/POM housing, PMMA optics, M3 threaded mounting holes and an M8 three-pin male connector. IP67 protection and −25 to +55 °C operation support machine integration.

Through-beam red LED sensor pair with 0–20 m sensing, PNP selectable light/dark switching and M8 three-pin male connector.

Key Features

  • Separate through-beam sender and receiver units
  • 0–20 m sensing and 0–33 m maximum range
  • 632 nm visible red LED; Ø850 mm spot at 12 m
  • 270° sensitivity potentiometer; separate light/dark rotary switch
  • PNP switching output; maximum current ≤100 mA
  • ≤0.5 ms response with resistive load; 1,000 Hz at 1:1 light/dark ratio
  • 10–30 V DC; sender ≤15 mA / receiver ≤20 mA without load
  • M8 three-pin male connector on each unit
  • ABS/PC/POM housing; PMMA optics; M3 threaded mounting holes
  • IP67; −25 to +55 °C operation; −40 to +70 °C storage

Span the material path with separate sender and receiver units and use adjustable sensitivity and selectable switching to report beam interruption.

Technical Specification Matrix

ParameterValue
Functional principleThrough-beam photoelectric sensor; separate sender and receiver
Housing designRectangular
Sensing range0–20 m
Maximum sensing range0–33 m
Light sourceVisible red LED
Wavelength632 nm
Light spot sizeØ850 mm at 12 m
LED service lifeAverage 100,000 h at ambient +25 °C
Adjustment270° sensitivity potentiometer
Digital outputPNP switching output; maximum current ≤100 mA
Switching modeLight/dark switching, selectable via rotary switch (L=light; D=dark)
Signal voltage HIGH/LOWSupply voltage −1.8 V / approximately 0 V
Response time≤0.5 ms signal transit time with resistive load
Switching frequency1,000 Hz at 1:1 light/dark ratio
Power supply10–30 V DC, limit values
Residual ripple±10%; remain within supply tolerances
Protection classIII
Circuit protectionA: supply reverse-polarity protection; B: output reverse-polarity protection; D: outputs overcurrent and short-circuit protection
Housing materialABS/PC/POM plastic
Optics materialPMMA plastic
ConnectionM8 three-pin male connector on each unit
MountingM3 threaded mounting holes
IP ratingIP67
Operating temperature−25 to +55 °C
Storage temperature−40 to +70 °C
Orange LED indicatorSwitching output active
Green LED indicatorPower on
Sender current consumption≤15 mA without load
Receiver current consumption≤20 mA without load
Pin assignmentSender: 1 BN=L+, 3 BU=M, 4 BK=not connected; receiver: 1 BN=L+, 3 BU=M, 4 BK=Q (CD-051)
Items suppliedTwo stainless steel 1.4301/304 BEF-W100-A mounting brackets

Industrial Applications

1. Counting separated cartons across a conveyor

A conveyor can position the sender and receiver across the route of separated opaque cartons. Each carton interrupts the red beam, producing a PNP state for external counting logic. The 0–20 m sensing range supports the installed separation, and the sensitivity potentiometer establishes the received-light condition. Setup checks carton gaps and transit speed against the response and switching-frequency limits.

Problem Solved

Beam interruption supplies a distinct carton-passage event for external counting logic, helping the conveyor track separated loads without relying on light reflected from their printed surfaces.

Carton counting Through-beam Selectable switching

2. Monitoring an opaque strip for a break

A strip feeder can place the sender and receiver on opposite sides of an opaque material path. Loss of material exposes the receiver to the red beam, changing the switching state. The potentiometer sets sensitivity for the installed separation, while the light/dark rotary switch selects the required output behavior for the external feed controller.

Problem Solved

A material-continuity signal helps the feed controller recognize a break or exhausted strip and coordinate its response before another operation proceeds with an empty material path.

Strip continuity Sensitivity adjustment Light/dark selection

3. Managing accumulation at a conveyor transfer

At a conveyor transfer, an opaque load can block the path between the separate sender and receiver while the receiving location remains occupied. External control logic evaluates the duration of the switching state to distinguish passing loads from sustained blockage. IP67 housings and M3 threaded mounting holes support positioning the optical pair around the transfer area.

Problem Solved

A sustained-occupancy reference helps external transfer logic coordinate upstream release when the receiving position is blocked, using the duration of an interrupted optical path.

Transfer occupancy IP67 M3 mounting
Select your currency