1. Confirming a metal slide reaches a monitored position
A machine slide can present a metal target close to the sensor’s active face at a selected position. The PNP normally open output supplies a discrete position condition to external sequencing logic. Installation respects the non-flush clearances and checks the actual target metal, approach direction and gap against the assured switching distance and reference reduction factors.
Problem Solved
A nearby-metal position reference helps external sequencing logic recognize the slide at a monitored point, reducing reliance on elapsed movement time for the next ordinary process step.
Metal position
PNP NO signal
Non-flush mounting
2. Checking a metal insert in a presented fixture
A fixture can present an expected metal insert within the sensor’s working gap while the empty fixture leaves that region clear of interfering metal. External inspection logic samples the PNP output after the fixture is seated. Setup verifies the insert material, placement tolerance and surrounding metal geometry, using the applicable reduction factor and the required non-flush mounting arrangement.
Problem Solved
A metal-present reference helps external inspection logic check an expected insert before further assembly, supporting an omitted-part check when the fixture provides a suitable sensing gap.
Metal insert
Fixture inspection
Material-dependent range
3. Counting repeated metal flags on a mechanism
A rotating or reciprocating mechanism can move separated metal flags past the sensing face so the output changes as each flag enters and leaves the detection region. An external counter evaluates those pulses. Commissioning checks actual flag material, gap, spacing and movement rate against the sensing specifications and 4,000 Hz switching frequency, with non-flush clearances maintained around the sensor.
Problem Solved
Repeated metal-passage signals help external counting logic follow mechanism cycles or events, using a defined target geometry and verified spacing within the sensor’s switching capability.
Metal flag counting
Cycle events
Inductive pulses