1. Counting separated cartons across a conveyor
A conveyor can position the radial optical face toward a reflector across the load path so separated opaque cartons interrupt the red beam. The sensitivity potentiometer establishes the installed optical condition and an external counter evaluates the fixed PNP dark-switching signal. Setup checks reflector spacing, beam coverage, carton gaps and travel speed against the sensing range, response and switching-frequency limits.
Problem Solved
A carton-passage signal gives an external counter an optical event across the conveyor, using radial sensor orientation and a reflector distance checked for the installed path.
Carton counting
Radial optics
Dark switching
2. Monitoring opaque web continuity at a feed point
A feed station can route an opaque web across the reflected beam between the radial sensor face and a suitable reflector. External process logic uses the fixed dark-switching PNP state as the material-present condition. Commissioning adjusts sensitivity and checks web position, lateral movement, beam coverage and the minimum reflector separation so a break in the web changes the observed signal.
Problem Solved
A material-present reference helps external process logic recognize a break in opaque feed, using interruption of a reflected beam rather than depending on light returned by the web surface.
Web continuity
Beam interruption
PNP interface
3. Checking transfer-path occupancy at a stop
A transfer stop can position the sensor so its radial red beam crosses the expected opaque carrier position and returns from a reflector. External sequencing logic samples the fixed PNP dark-switching state after the carrier settles. Installation checks the reflector distance, alignment, carrier coverage and potential gaps through the carrier that could leave part of the optical path clear.
Problem Solved
A carrier-occupancy reference helps external sequencing logic coordinate a transfer step, using a defined beam interruption checked at the actual stopped position and radial mounting orientation.
Transfer occupancy
Radial mounting
Fixed PNP