1. Air-Signal Control of a Single-Acting Fixture
A semi-automatic assembly fixture uses a pneumatic control signal to operate a single-acting cylinder. The normally closed 3/2-way valve provides supply and exhaust routing without requiring a local electrical coil. Its external pneumatic spring supplies the return action, while G1/8 working connections and 700 l/min standard nominal flow define the pneumatic interface for the fixture circuit.
Problem Solved
Pneumatic actuation converts an air signal into working-flow switching, allowing a single-acting fixture circuit to be controlled without adding electrical actuation at the valve.
Pneumatic actuation
3/2-way NC
G1/8
2. Externally Piloted Vacuum-Line Switching
A suction-handling circuit needs valve actuation even though its working line is below atmospheric pressure. This model uses external pilot air at 2.5–10 bar while the working circuit is rated down to −0.9 bar. Reversible flow direction supports vacuum routing; the manufacturer's upstream-filter requirement prevents intake contamination from being carried into the valve during vacuum operation.
Problem Solved
External pneumatic control separates the actuation supply from the vacuum line, allowing switching at sub-atmospheric working pressure without relying on positive pressure in that line.
−0.9 bar working limit
External pilot
Reversible flow
3. Selection Between Two Pneumatic Pressure Levels
A fixture requires different regulated air levels for two process stages. Festo documents dual-pressure operation for the M32C-E configuration, whose external pneumatic spring and reversible flow permit the associated circuit arrangement. The valve supplies a pneumatically selected connection state, while the two pressure regulators and the sequence logic remain separate components of the complete installation.
Problem Solved
Dual-pressure circuit capability lets a pneumatic command select the required working connection, supporting staged pressure delivery without treating the valve itself as a pressure regulator.
Dual-pressure capability
External pneumatic spring
Reversible flow