1. Linear Part-Ejection Mechanism
An assembly machine ejects a completed part from a fixture through a short linear movement. The cylinder supplies an 80 mm double-acting stroke, with the M10×1.25 rod thread connecting to the ejector mechanism. Adjustable cushioning at both ends supports setting the end approach, while proximity switches can provide the machine sequence with cylinder-position signals.
Problem Solved
A defined powered stroke and return movement support repeatable ejector sequencing, with threaded attachment and proximity-switch detection linking the cylinder to the surrounding mechanism and controls.
80 mm stroke
Double acting
M10×1.25 rod thread
2. Pneumatic Clamp Movement in an Assembly Fixture
A workstation moves a mechanical clamp into and out of position during part loading. The cylinder provides 483 N theoretical advancing force and 415 N theoretical return force at 6 bar, giving the builder a documented actuator-force basis for the clamp linkage. Its double-acting operation powers both movements, while G1/8 ports connect the fixture's directional-control circuit.
Problem Solved
Published theoretical forces and powered motion in both directions support sizing a pneumatic clamp linkage, rather than assuming the same force is available on advance and return.
483 N theoretical advance
415 N theoretical return
G1/8
3. ISO-Format Conveyor Diverter Actuation
A conveyor installation uses a linkage to move a diverter between product routes. The ISO 15552 cylinder provides an established cylinder format, an 80 mm stroke and adjustable pneumatic end cushioning. Female-thread or accessory mounting connects it to the machine structure, and proximity-switch position detection can indicate completion of each movement to the conveyor sequence.
Problem Solved
The ISO cylinder format supports mechanical integration while adjustable cushioning and position-detection provision help coordinate the diverter's end movements with the conveyor control sequence.
ISO 15552
Adjustable cushioning
Position detection