1. Linear Part-Ejection Mechanism
An assembly machine ejects a completed lightweight part from a fixture through a defined linear movement. The cylinder supplies a 100 mm double-acting stroke, with the M4 rod thread connecting to the ejector mechanism. Elastic elements cushion both end positions, while proximity switches can provide the machine sequence with cylinder-position signals.
Problem Solved
A defined powered stroke and return movement support repeatable ejector sequencing, with threaded attachment and proximity-switch detection linking the cylinder to the surrounding mechanism and controls.
100 mm stroke
Double acting
M4 rod thread
2. Pneumatic Clamp Movement in an Assembly Fixture
A workstation moves a mechanical clamp into and out of position during part loading. The cylinder provides 47.1 N theoretical advancing force and 39.6 N theoretical return force at 6 bar, giving the builder a documented actuator-force basis for the clamp linkage. Its double-acting operation powers both movements, while M5 ports connect the fixture's directional-control circuit.
Problem Solved
Published theoretical forces and powered motion in both directions support sizing a pneumatic clamp linkage, rather than assuming the same force is available on advance and return.
47.1 N theoretical advance
39.6 N theoretical return
M5
3. ISO-Format Conveyor Diverter Actuation
A conveyor installation uses a linkage to move a small diverter between product routes. The ISO 6432 cylinder provides an established cylinder format, a 100 mm stroke and elastic end cushioning. Accessory mounting connects it to the machine structure, and proximity-switch position detection can indicate completion of each movement to the conveyor sequence.
Problem Solved
The ISO cylinder format supports mechanical integration, while elastic end cushioning and position-detection provision help coordinate the diverter movements with the conveyor control sequence.
ISO 6432
Elastic cushioning
Position detection