Sale!

Festo 5255533 Servo Motor, 1.77 kW, Multi-Turn Encoder, Brake

Original price was: USD 1,312.48.Current price is: USD 1,125.80.

6.3 Nm nominal torque at 2700 rpm, 22.4 Nm peak torque, 19-bit absolute feedback, an 11 Nm holding brake and a 15-contact M23 hybrid connector.

SKU Festo-5255533 Category
Festo Servo Motor

Festo EMMT-AS-100-M-HS-RMB Servo Motor

BrandFesto
Model IdentifierEMMT-AS-100-M-HS-RMB
Official Part Number5255533

Technical Overview

The Festo EMMT-AS-100-M-HS-RMB servo motor provides 1770 W nominal power and 6.3 Nm nominal torque at 2700 rpm, with 8.6 Nm standstill and 22.4 Nm peak torque ratings. An inductive multi-turn absolute encoder provides 19-bit position resolution and 4096 detectable revolutions through EnDat feedback. The integrated holding brake has an 11 Nm holding torque and a 24 V DC supply requirement. A 15-contact M23 hybrid connector combines the documented motor connection interface, while digital temperature transmission supports thermal monitoring. The manufacturer specifies IP67 for the housing and connections, with shaft protection dependent on the rotary shaft seal arrangement; this datasheet lists IP40 as the base protection rating.

1.77 kW servo motor with 6.3 Nm nominal torque, 19-bit multi-turn absolute encoder, 11 Nm holding brake and M23 hybrid connection.

Key Features

  • 1770 W nominal motor power; 6.3 Nm nominal torque at 2700 rpm
  • 8.6 Nm standstill torque and 22.4 Nm peak torque
  • 4790 rpm maximum rotational speed; separate 13000 rpm mechanical limit
  • 19-bit inductive multi-turn absolute encoder; 4096 detectable revolutions
  • 524288 encoder position values per revolution; EnDat interface
  • 11 Nm holding brake with 24 V DC, 18 W electrical rating
  • 15-contact M23x1 hybrid connector
  • Digital motor-temperature transmission via EnDat 2.2
  • IP67 housing including connections; shaft IP40 without seal, IP65 with seal
  • −40 to +40 °C base ambient range; elevated-temperature and altitude derating specified

Combine 1.77 kW servo output, multi-turn absolute position feedback and an 11 Nm holding brake in one M23-connected motor.

Technical Specification Matrix

ParameterValue
Ambient temperature-40 °C...40 °C
Note on ambient temperatureUp to 80°C with derating of -1.5% per degree Celsius
Max. installation height4000 m
Note on max. installation heightAs of 1,000 m: only with derating of -1.0% per 100 m
Storage temperature-40 °C...70 °C
Relative air humidity0 - 90%
Conforms to standardIEC 60034
Temperature class as per EN 60034-1F
Max. winding temperature155 °C
Rating class as per EN 60034-1S1
Temperature monitoringDigital motor temperature transmission via EnDat® 2.2
Motor type to EN 60034-7IM B5; IM V1; IM V3
Mounting positionAny
Degree of protectionIP40
Note on degree of protectionIP40 for motor shaft without rotary shaft seal; IP65 for motor shaft with rotary shaft seal; IP67 for motor housing including connection components
Concentricity, coaxiality, axial runout to DIN SPEC 42955N
Balance qualityG 2.5
Detent torque<1.0% of peak torque
Bearing lifetime under nominal conditions20000 h
Interface code, motor out100A
Electrical connection 1, connection typeHybrid plug
Electrical connection 1, connector systemM23x1
Electrical connection 1, number of connections/cores15
Pollution degree2
Note on materialsRoHS compliant
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
ApprovalRCM; c UL us - Recognised (Oil)
CE mark (see declaration of conformity)To EU EMC Directive; To EU Low Voltage Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions; To UK regulations for electrical equipment
Certificate issuing authorityUL E342973
Nominal operating voltage DC680 V
Type of winding switchStar inside
Number of pole pairs5
Standstill torque8.6 Nm
Nominal torque6.3 Nm
Peak torque22.4 Nm
Nominal rotary speed2700 rpm
Max. rotational speed4790 rpm
Max. mechanical speed13000 rpm
Angular acceleration100000 rad/s²
Nominal power rating of motor1770 W
Continuous stall current5.9 A
Nominal motor current4.3 A
Peak current22.1 A
Motor constant1.46 Nm/A
Standstill torque constant1.66 Nm/A
Voltage constant, phase-to-phase100 mVmin
Phase-phase winding resistance1.84 Ohm
Phase-phase winding inductance20.4 mH
Winding longitudinal inductivity Ld (phase)10.2 mH
Winding cross inductivity Lq (phase)15.3 mH
Electric time constant16.6 ms
Thermal time constant73 min
Thermal resistance0.5 K/W
Measuring flange300 x 300 x 20 mm, steel
Total mass moment of inertia of output5.34 kgcm²
Physical Weight (kg)8.2
Permissible axial shaft load200 N
Permissible radial shaft load1110 N
Rotor position sensorAbsolute encoder, multi-turn
rotor position sensor, manufacturer designationEQI 1331
rotor position sensor, absolute detectable revolutions4096
Rotor position encoder interfaceEnDat 22
Rotor position sensor, encoder measuring principleInductive
rotor position sensor, DC operating voltage5 V
rotor position sensor, DC operating voltage range3.6 V...14 V
rotor position sensor, position values per revolution524288
Rotor position transducer resolution19 bit
rotor position sensor, system accuracy of angle measurement-65 arcsec...65 arcsec
Brake holding torque11 Nm
Operating voltage DC for brake24 V
Brake current consumption0.75 A
Power consumption, brake18 W
Brake coil resistance32 Ohm
Brake coil inductivity900 mH
Brake separation time80 ms
Brake closing time20 ms
DC brake response delay4 ms
Max. brake no-load speed10000 rpm
Max. friction per braking process12000 J
Number of emergency stops per hour1
Total brake friction1335 kJ
Mass moment of inertia of brake0.74 kgcm²
Switching cycles holding brake10 million idle actuations (without friction work!)
Mean time to failure (MTTF), subcomponent190 years, rotor position encoder
Energy efficiencyENEFF (CN) / Class 2

Industrial Applications

1. Servo-Driven Linear Transfer Axis

A machine transfers tooling along a motor-driven linear axis using a suitable mechanical transmission and servo drive. The motor's 6.3 Nm nominal torque at 2700 rpm and 22.4 Nm peak torque provide documented input ratings for sizing the motion system. Its 19-bit absolute encoder supplies position feedback, while digital motor-temperature transmission gives the drive a thermal monitoring input.

Problem Solved

Documented torque and speed ratings provide a sizing basis for the transfer axis, while absolute feedback and temperature transmission supply the control system with motion and thermal information.

1.77 kW 6.3 Nm nominal 19-bit feedback

2. Multi-Revolution Rotary Position Tracking

A rotary mechanism completes several revolutions between defined machine positions, so its control system needs position information beyond a single revolution. The motor's multi-turn absolute encoder detects 4096 revolutions and provides 524288 position values per revolution. EnDat feedback connects that measured position to the matched drive, supporting tracking of the motor shaft across the mechanism's programmed travel.

Problem Solved

Multi-turn absolute feedback combines revolution count with within-revolution position, giving the drive measured shaft-position information for mechanisms whose travel spans more than one motor revolution.

4096 revolutions 524288 values/revolution Multi-turn absolute

3. Stationary Shaft Holding Between Process Steps

A motor-driven mechanism includes planned stationary periods between production movements. The integrated brake provides an 11 Nm holding-torque rating, with a 24 V DC supply, 80 ms separation time and 20 ms closing time. These component values support coordinating brake release and engagement with the servo sequence, while the transmission and external load determine the torque required at the motor shaft.

Problem Solved

An integrated holding brake provides a documented stationary holding element, and its electrical and timing data let the drive sequence coordinate brake operation with commanded motor movement.

11 Nm holding torque 24 V DC brake 20 ms closing
Select your currency