1. Three-State Linear Transfer Control
A pneumatic transfer axis needs extension, retraction and a neutral command between machine steps. The 5/3-way valve connects a double-acting cylinder to two directional states and a closed-centre state. Its M5 ports and 210 l/min standard nominal flow provide a defined connection and flow basis for selecting the surrounding cylinder circuit.
Problem Solved
A closed-centre third state blocks the valve's working paths between directional commands, giving the controller a distinct neutral circuit state alongside extension and retraction.
5/3-way closed centre
M5
210 l/min nominal
2. Gripper Circuit with a Neutral Valve State
A handling machine operates a suitable double-acting pneumatic gripper through open, close and neutral valve commands. The closed-centre function supplies the third circuit state, while mechanical spring reset returns the spool when its actuation is removed. Internal pilot operation at 3–8 bar, an electrical sub-base connection and manifold-rail mounting characterize the documented control arrangement for this exact valve.
Problem Solved
Three valve states support a gripper sequence with a defined neutral connection state, while internal piloting and manifold mounting consolidate the pneumatic control assembly.
Closed centre
Spring reset
Manifold mounting
3. Reversible Pneumatic Motor Command Circuit
A machine uses a suitable reversible pneumatic motor for a positioning or winding task. The 5/3-way arrangement provides two directional air-routing commands and a closed-centre neutral command through the M5 working ports. The specified switching times support sequence planning; the motor's run-down and mechanical stopping behaviour remain properties of the complete motor and load system.
Problem Solved
One directional valve provides forward, reverse and neutral air-routing commands, allowing the machine controller to select the required circuit state through the electrical sub-base interface.
Forward/reverse/neutral
24 V DC
14 ms reversal