1. Transfer-Cylinder Directional Control
An assembly station moves a part-transfer cylinder between two positions. The valve's 5/2-way double-solenoid function alternates the working air connections, while its four-pin M8 central plug connects the electrical commands. A standardized 26 mm ISO 15407-1 sub-base organizes the pneumatic connections beneath the valve, and LED indication helps identify the applied command during commissioning.
Problem Solved
Two directional valve states provide cylinder advance and return routing, while the standardized sub-base and central M8 electrical connection organize the transfer station's pneumatic control interface.
5/2-way
26 mm sub-base
24 V DC
2. Double-Acting Gripper Direction Commands
A handling machine operates a suitable double-acting gripper between its open and closed circuit states. The double-solenoid 5/2-way valve selects the two directional connections using its 24 V DC four-pin M8 interface. Internal pilot operation at 3–8 bar defines the working supply requirement, while holding-current reduction characterizes the coil drive when an electrical command remains applied.
Problem Solved
The two solenoid commands select the gripper circuit routing states, with internal pilot and electrical-interface specifications defining the valve arrangement for the handling sequence.
5/2 double solenoid
3–8 bar internal pilot
Holding-current reduction
3. Standardized Valve-Station Integration
A machine builder groups directional functions around ISO 15407-1 sub-base interfaces and connects each valve through a four-pin M8 central plug. This 26 mm valve has a 27 mm mounting grid pitch, making its station spacing explicit. The manufacturer distinguishes 1400 l/min valve-only flow from the 1100 l/min sub-base and interlinked ratings, supporting assessment against the actual pneumatic station arrangement.
Problem Solved
Standardized mounting and the central M8 electrical interface define station integration, while arrangement-specific flow data and grid pitch provide concrete information for the grouped pneumatic layout.
ISO 15407-1
27 mm grid pitch
Central M8 plug