Sale!

Festo 534533 Dual 3/2 Normally Open Valve, ISO 26 mm, 24 V DC

Original price was: USD 151.06.Current price is: USD 130.26.

Two monostable functions with pneumatic spring reset, 900 l/min nominal flow, four-pin M8 interface, current reduction and IP65/NEMA 4 protection.

SKU Festo-534533 Category
Festo Solenoid Valves

Festo VSVA-B-T32U-AH-A1-1R2L Dual Normally Open Solenoid Valve

BrandFesto
Model IdentifierVSVA-B-T32U-AH-A1-1R2L
Official Part Number534533

Technical Overview

The Festo VSVA-B-T32U-AH-A1-1R2L combines two normally open, monostable 3/2-way functions in a 26 mm ISO 15407-1 valve body. Pneumatic spring reset and internal pilot supply operate within the specified 3–8 bar range, with non-reversible flow. Standard nominal flow is 900 l/min for an interlinked arrangement, distinct from 1250 l/min valve-only and 1000 l/min individual-sub-base ratings. The 24 V DC four-pin M8 central plug connects the electrical commands, with holding-current reduction from 110 mA pickup to 30 mA after 20 ms per coil. The 270 g valve has 20 ms on/33 ms off timing, LED indication and IP65/NEMA 4 protection.

26 mm ISO dual normally open 3/2-way valve with pneumatic spring reset, internal piloting, 900 l/min nominal flow and four-pin M8 connection.

Key Features

  • Two normally open monostable 3/2-way functions
  • 26 mm construction width with ISO 15407-1 sub-base interface
  • Pneumatic spring reset and internal pilot supply
  • 3–8 bar operating range with non-reversible flow
  • 900 l/min standard nominal interlinked flow
  • 1250 l/min valve-only and 1000 l/min individual-sub-base ratings
  • 24 V DC interface via four-pin M8 central plug
  • 110 mA pickup and 30 mA after 20 ms per coil with holding-current reduction
  • 20 ms on/33 ms off switching, LED indication and manual override
  • 270 g product weight with IP65/NEMA 4 protection

Combine two normally open 3/2-way functions on a 26 mm ISO sub-base with pneumatic spring reset and 900 l/min standard nominal flow.

Technical Specification Matrix

ParameterValue
Valve function2x3/2 open monostable
Type of actuationElectrical
Construction width26 mm
Standard nominal flow rate (standardised to DIN 1343)900 l/min
pneumatic working portSub-base size 26 mm to ISO 15407-1
Operating voltage24 V DC
Operating pressure0.3 MPa...0.8 MPa; 3 bar...8 bar
DesignPiston gate valve
Type of resetPneumatic spring
ApprovalRCM; c UL us - Recognised (Oil)
CE mark (see declaration of conformity)To EU EMC Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
Degree of protectionIP65; NEMA 4
Nominal size9 mm
Mounting grid pitch27 mm
Exhaust-air functionCan be throttled; Via throttle plate; Via individual sub-base
Sealing principleSoft
Mounting positionAny
Conforms to standardISO 15407-1
Manual overrideNon-detenting
Type of pilotingPiloted
Pilot air supplyInternal
Flow directionNon-reversible
lapOverlap
Reverse polarity protectionFor all electrical connections
Additional functionsHolding current reduction; Safety shut-off
Signal status displayLED
Flow rate of valve1250 l/min
Flow rate of valve on individual sub-base1000 l/min
Flow rate of pneumatically interlinked valve900 l/min
Switching time off33 ms
Switching time on20 ms
Duty cycle100%
Max. positive test pulse with 0 signal400 µs
Max. negative test pulse with 1 signal100 µs
Nominal pick-up current per solenoid coil110 mA to 20 ms
Nominal current with current reduction30 mA after 20 ms
Characteristic coil data24 V DC: low-current phase 1.0 W, high-current phase 2.4 W
Permissible voltage fluctuations+/-10%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-5 °C...50 °C
Relative air humidity0 - 90%
Protection against direct and indirect contactPELV
Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature-5 °C...50 °C
Max. tightening torque for valve mounting1.8 Nm...2.2 Nm
Physical Weight (kg)0.27
Electrical connection4-pin; M8x1; Central plug; Round design
Type of mountingOn sub-base; Via through-hole and screw
Note on materialsRoHS compliant
Material sealsFluoro rubber; HNBR; NBR
Material housingDie-cast aluminium

Industrial Applications

1. Normally Open Air-Purge Branch Control

A machine needs two air-purge branches whose normal valve states are open, with electrical commands changing the respective routing states. This dual 3/2 normally open valve provides both functions in one 26 mm body, with pneumatic spring reset. Internal piloting at 3–8 bar and a four-pin M8 central connection define the pneumatic supply and electrical command interfaces of the selected valve.

Problem Solved

Two normally open functions consolidate the purge-branch routing in one valve body, providing electrical switching and pneumatic spring return for circuits designed around an open normal state.

2 × 3/2 normally open Pneumatic spring 3–8 bar

2. Energize-to-Vent Single-Acting Fixture Circuits

A fixture uses suitable single-acting pneumatic mechanisms whose working lines require pressure in the normal valve state and venting when commanded. The two normally open 3/2 functions provide that routing arrangement, while pneumatic spring reset restores the respective normal states. The four-pin M8 interface carries the electrical commands, and holding-current reduction characterizes the coil drive during a maintained energized command.

Problem Solved

The normally open three-port functions provide pressure and vent routing for energize-to-vent fixture circuits, consolidating the two pneumatic functions with their documented electrical command interface.

Normally open routing Four-pin M8 Holding-current reduction

3. Dual-Function ISO Valve-Station Integration

A machine builder groups two normally open branch functions at a single ISO valve position and needs flow data matched to the station arrangement. This 26 mm valve has a 27 mm mounting pitch and separately specified 1250 l/min valve-only, 1000 l/min individual-sub-base and 900 l/min interlinked flows. Those distinctions characterize the actual installation more precisely than using the valve-only rating for every station.

Problem Solved

Dual functions consolidate branch routing at one standardized valve position, while arrangement-specific flow ratings and installation pitch provide concrete data for planning the pneumatic station layout.

ISO 15407-1 27 mm pitch Arrangement-specific flow
Select your currency