Sale!

Festo 534772 Dual 3/2 Normally Open Valve, ISO 18 mm, 24 V DC

Original price was: USD 107.64.Current price is: USD 93.08.

Two monostable functions with pneumatic spring reset, 400 l/min nominal flow, four-pin M8 interface, current reduction and IP65 protection.

SKU Festo-534772 Category
Festo Solenoid Valves

Festo VSVA-B-T32U-AH-A2-1R2L Dual Normally Open Solenoid Valve

BrandFesto
Model IdentifierVSVA-B-T32U-AH-A2-1R2L
Official Part Number534772

Technical Overview

The Festo VSVA-B-T32U-AH-A2-1R2L combines two normally open, monostable 3/2-way functions in an 18 mm ISO 15407-1 valve body. Pneumatic spring reset and internal pilot supply operate within the specified 3–8 bar range, with non-reversible flow. Standard nominal flow is 400 l/min for an interlinked arrangement, distinct from 600 l/min valve-only and 450 l/min individual-sub-base ratings. The 24 V DC four-pin M8 central plug connects the electrical commands, with holding-current reduction and specified coil data of 1.0 W in the low-current phase and 2.4 W in the high-current phase. The 140 g valve has 10 ms on/22 ms off timing, LED indication and IP65 protection.

18 mm ISO dual normally open 3/2-way valve with pneumatic spring reset, internal piloting, 400 l/min nominal flow and four-pin M8 connection.

Key Features

  • Two normally open monostable 3/2-way functions
  • 18 mm construction width with ISO 15407-1 sub-base interface
  • Pneumatic spring reset and internal pilot supply
  • 3–8 bar operating range with non-reversible flow
  • 400 l/min standard nominal interlinked flow
  • 600 l/min valve-only and 450 l/min individual-sub-base ratings
  • 24 V DC interface via four-pin M8 central plug
  • Holding-current reduction; coil data 1.0 W low-current and 2.4 W high-current phases
  • 10 ms on/22 ms off switching, LED indication and manual override
  • 140 g product weight with IP65 protection

Combine two normally open 3/2-way functions on a 18 mm ISO sub-base with pneumatic spring reset and 400 l/min standard nominal flow.

Technical Specification Matrix

ParameterValue
Valve function2x3/2 open monostable
Type of actuationElectrical
Construction width18 mm
Standard nominal flow rate (standardised to DIN 1343)400 l/min
pneumatic working portSub-base size 18 mm to ISO 15407-1; Sub-base size 02 to VDMA 24563
Operating voltage24 V DC
Operating pressure0.3 MPa...0.8 MPa; 3 bar...8 bar
DesignPiston gate valve
Type of resetPneumatic spring
ApprovalC-Tick; c UL us - Recognised (Oil)
CE mark (see declaration of conformity)To EU EMC Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
Degree of protectionIP65
Nominal size5 mm
Exhaust-air functionCan be throttled
Sealing principleSoft
Mounting positionAny
Conforms to standardISO 15407-1; VDMA 24563
Manual overrideNon-detenting
Type of pilotingPiloted
Pilot air supplyInternal
Flow directionNon-reversible
lapOverlap
Reverse polarity protectionFor all electrical connections
Additional functionsHolding current reduction; Safety shut-off
Signal status displayLED
Flow rate of valve600 l/min
Flow rate of valve on individual sub-base450 l/min
Flow rate of pneumatically interlinked valve400 l/min
Switching time off22 ms
Switching time on10 ms
Operational voltage range DC21.6 V...26.4 V
Duty cycle100%
Max. positive test pulse with 0 signal500 µs
Max. negative test pulse with 1 signal500 µs
Characteristic coil data24 V DC: low-current phase 1.0 W, high-current phase 2.4 W
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN; 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-5 °C...50 °C
Relative air humidity0 - 90%
Protection against direct and indirect contactPELV
Ambient temperature-5 °C...50 °C
Max. tightening torque for valve mounting0.9 Nm...1.1 Nm
Physical Weight (kg)0.14
Electrical connection4-pin; M8x1; Central plug; Round design
Type of mountingOn sub-base
Note on materialsRoHS compliant

Industrial Applications

1. Normally Open Air-Purge Branch Control

A machine needs two air-purge branches whose normal valve states are open, with electrical commands changing the respective routing states. This dual 3/2 normally open valve provides both functions in one 18 mm body, with pneumatic spring reset. Internal piloting at 3–8 bar and a four-pin M8 central connection define the pneumatic supply and electrical command interfaces of the selected valve.

Problem Solved

Two normally open functions consolidate the purge-branch routing in one valve body, providing electrical switching and pneumatic spring return for circuits designed around an open normal state.

2 × 3/2 normally open Pneumatic spring 3–8 bar

2. Energize-to-Vent Single-Acting Fixture Circuits

A fixture uses suitable single-acting pneumatic mechanisms whose working lines require pressure in the normal valve state and venting when commanded. The two normally open 3/2 functions provide that routing arrangement, while pneumatic spring reset restores the respective normal states. The four-pin M8 interface carries the electrical commands, and holding-current reduction characterizes the coil drive during a maintained energized command.

Problem Solved

The normally open three-port functions provide pressure and vent routing for energize-to-vent fixture circuits, consolidating the two pneumatic functions with their documented electrical command interface.

Normally open routing Four-pin M8 Holding-current reduction

3. Dual-Function ISO Valve-Station Integration

A machine builder groups two normally open branch functions at a single standardized valve position and needs flow data matched to the station arrangement. This 18 mm valve uses an ISO 15407-1 and VDMA 24563 sub-base interface, with separately specified 600 l/min valve-only, 450 l/min individual-sub-base and 400 l/min interlinked flows. Those distinctions characterize the actual installation more precisely than using valve-only flow for every station.

Problem Solved

Dual functions consolidate branch routing at one standardized valve position, while arrangement-specific flow ratings and the specified sub-base standards provide concrete data for planning the pneumatic station.

ISO 15407-1 VDMA 24563 Arrangement-specific flow
Select your currency