1. Pneumatic Switching of a Cooling-Water Branch
A machine needs on/off flow control in a water branch using a remote pneumatic command. The angle-seat valve provides a normally closed 2/2-way path through its G1 process connection, with mechanical spring return. Its 0–10 bar medium-pressure limit, 11 m³/h Kv and below-seat flow direction characterize the selected water-line component, while 6–10 bar control air operates the piston drive separately.
Problem Solved
Pneumatic actuation switches the water branch through a defined normally closed valve function, separating the process fluid connection from the compressed-air command interface.
Water medium
G1 process port
6–10 bar control air
2. Vapour-Line On/Off Process Control
A process skid needs a pneumatic valve for a vapour line with documented high-temperature material characteristics. Festo lists vapour among the supported media and specifies a media-temperature range to +200 °C for this exact stainless-steel/PTFE configuration. The G1 valve has 24 mm nominal size and 0–10 bar medium-pressure limit, with any-position mounting for integration into the skid's actual piping arrangement.
Problem Solved
The documented vapour compatibility and stainless-steel/PTFE construction provide a defined component basis for pneumatic process-line switching within the specified pressure and temperature conditions.
Vapour listed medium
PTFE seals
0–10 bar medium
3. On/Off Routing of a Mineral-Oil Process Line
A process machine needs a pneumatic on/off valve for a mineral-oil line rather than a valve specified only for compressed air. This configuration lists mineral oil and mineral-oil-based hydraulic fluid, with a maximum viscosity of 600 mm²/s. Its stainless-steel process housing, PTFE seals and below-seat flow direction define relevant construction and flow characteristics for evaluating the selected line service.
Problem Solved
Explicit oil-medium and viscosity specifications characterize the valve for a liquid process branch, while pneumatic actuation supplies the on/off command through a separate control-air connection.
Mineral oil listed
600 mm²/s maximum
Below-seat flow