1. Exhaust Restriction for a Pneumatic Actuator Stroke
A pneumatic mechanism needs an adjustable restriction in its exhaust path to influence movement behavior. Installed at a suitable G1/8 exhaust connection, the GRE uses a slotted-head screw to vary flow while retaining a silencer. Its 0–520 l/min rating at 6-to-0 bar characterizes the adjustment range, while actual actuator speed depends on the cylinder, load and complete circuit.
Problem Solved
Adjustable exhaust restriction gives the mechanism a local pneumatic setting for its discharge path, combining that adjustment with the documented silencer in one screw-in component.
Exhaust restriction
G1/8
Slotted screw adjustment
2. Combined Exhaust Treatment at a Valve Port
A machine valve exhaust needs both a restriction setting and a silencing element at the local discharge connection. This GRE combines the manufacturer's sound-pressure-control function with a silencer, using a G1/8 screw-in interface. The 15 g assembly and any-position mounting provide concrete installation characteristics, without requiring separate assumptions about a numerical noise-reduction value or a universal exhaust flow condition.
Problem Solved
The combined component provides adjustable restriction and silencing at one exhaust port, keeping both documented functions together within the same local pneumatic connection.
Silencer included
Sound-pressure control
15 g
3. Manual Vent-Path Setting on a Pneumatic Test Bench
A pneumatic test bench needs to vary the restriction in a local vent branch during setup. The slotted adjusting screw supplies the manual setting interface, with a documented 0–520 l/min range at 6-to-0 bar and a 0–10 bar operating-pressure range. The screwed plug mounts directly at a suitable G1/8 connection, while the complete bench volume and pressure conditions determine the resulting vent behavior.
Problem Solved
The adjustable exhaust component gives the bench a defined local restriction setting, with explicit pressure-specific flow data for evaluating the selected pneumatic vent branch.
0–520 l/min at 6-to-0 bar
0–10 bar
Screw-in mounting