Sale!

Festo 10352 Exhaust Flow Control Valve, G1/4, With Silencer

Original price was: USD 16.12.Current price is: USD 14.56.

Screw-in exhaust control with slotted adjustment screw, 996 l/min nominal controlled flow, 0–10 bar operation, NBR seals and 25 g product weight.

SKU Festo-10352 Category
Festo Flow Control Valves

Festo GRE-1/4 Exhaust Air Flow Control Valve

BrandFesto
Model IdentifierGRE-1/4
Official Part Number10352

Technical Overview

The Festo GRE-1/4 is a screw-in exhaust-air flow control valve combining adjustable restriction with a silencer. Its G1/4 connection and slotted-head adjusting screw provide the mounting and manual setting interface, with a stated standard nominal controlled flow of 996 l/min. At a 6-to-0 bar pressure condition, the specified flow range is 0–996 l/min. The manufacturer identifies a sound-pressure-control function, without stating a numerical acoustic reduction. The 25 g assembly uses an aluminium screwed plug, brass adjusting screw and NBR seals. It operates from 0 to 10 bar and −10 to +70 °C and permits installation in any mounting position.

G1/4 screw-in exhaust-air control with silencer, slotted screw adjustment, 0–996 l/min flow at 6-to-0 bar and 25 g product weight.

Key Features

  • Exhaust-air flow control with integrated silencer
  • Manufacturer-listed sound-pressure-control function
  • G1/4 screw-in pneumatic connection
  • Slotted-head adjustment screw
  • 996 l/min standard nominal controlled flow
  • 0–996 l/min flow range at the stated 6-to-0 bar condition
  • 0–10 bar operating pressure and any mounting position
  • −10 to +70 °C ambient and media range
  • Aluminium screwed plug, brass adjusting screw and NBR seals
  • 25 g product weight

Adjust exhaust restriction and retain silencing at a G1/4 port using a 25 g screw-in valve with slotted-head control.

Technical Specification Matrix

ParameterValue
Valve functionSound pressure control function
Selection of additional functionsWith silencer
Pneumatic connection, port 1G1/4
Adjustment componentSlotted head screw
Type of mountingScrew-in
Standard nominal flow rate in flow control direction996 l/min
Standard flow rate 0.6->0 MPa (6->0 bar, 87->0 psi)0 l/min...996 l/min
Operating pressure0 bar...10 bar
Ambient temperature-10 °C...70 °C
Mounting positionAny
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-10 °C...70 °C
Physical Weight (kg)0.025
Material screwed plugWrought aluminium alloy
Note on materialsRoHS compliant
Material sealsNBR
Material adjusting screwBrass

Industrial Applications

1. Exhaust Restriction for a Pneumatic Actuator Stroke

A pneumatic mechanism needs an adjustable restriction in its exhaust path to influence movement behavior. Installed at a suitable G1/4 exhaust connection, the GRE uses a slotted-head screw to vary flow while retaining a silencer. Its 0–996 l/min rating at 6-to-0 bar characterizes the adjustment range, while actual actuator speed depends on the cylinder, load and complete circuit.

Problem Solved

Adjustable exhaust restriction gives the mechanism a local pneumatic setting for its discharge path, combining that adjustment with the documented silencer in one screw-in component.

Exhaust restriction G1/4 Slotted screw adjustment

2. Combined Exhaust Treatment at a Valve Port

A machine valve exhaust needs both a restriction setting and a silencing element at the local discharge connection. This GRE combines the manufacturer's sound-pressure-control function with a silencer, using a G1/4 screw-in interface. The 25 g assembly and any-position mounting provide concrete installation characteristics, without requiring separate assumptions about a numerical noise-reduction value or a universal exhaust flow condition.

Problem Solved

The combined component provides adjustable restriction and silencing at one exhaust port, keeping both documented functions together within the same local pneumatic connection.

Silencer included Sound-pressure control 25 g

3. Manual Vent-Path Setting on a Pneumatic Test Bench

A pneumatic test bench needs to vary the restriction in a local vent branch during setup. The slotted adjusting screw supplies the manual setting interface, with a documented 0–996 l/min range at 6-to-0 bar and a 0–10 bar operating-pressure range. The screwed plug mounts directly at a suitable G1/4 connection, while the complete bench volume and pressure conditions determine the resulting vent behavior.

Problem Solved

The adjustable exhaust component gives the bench a defined local restriction setting, with explicit pressure-specific flow data for evaluating the selected pneumatic vent branch.

0–996 l/min at 6-to-0 bar 0–10 bar Screw-in mounting
Select your currency