Sale!

Festo 567347 CPX Control Block, CODESYS V2.3, CAN and Ethernet

Original price was: USD 441.48.Current price is: USD 379.08.

CPX controller with 400 MHz processor, 4 MB user-program memory, CAN bus, 10/100 Mbit/s RJ45 Ethernet, Modbus TCP and electric-drive motion functions.

Festo Remote I/O and Network Interface Components

Festo CPX-CEC-C1 Control Block

BrandFesto
Model IdentifierCPX-CEC-C1
Official Part Number567347

Technical Overview

The Festo CPX-CEC-C1 is a CPX control block programmed with CODESYS provided by Festo V2.3 using IEC 61131-3 languages and CFC. Its 400 MHz processor has 32 MB Flash and 32 MB RAM, with 4 MB allocated to the user program and documented support for motion functions for electric drives. An isolated nine-pin Sub-D CAN interface and an eight-pin RJ45 Ethernet socket provide the machine-network connections; Ethernet supports TCP/IP, EasyIP and Modbus TCP at 10/100 Mbit/s. Channel- and module-oriented diagnostics, diagnostic memory and local RUN/STOP controls support operation. The 155 g module uses nominal 24 V DC and has IP65/IP67 protection.

CODESYS V2.3 CPX controller with 400 MHz processor, CAN interface, RJ45 Ethernet, diagnostic functions and electric-drive motion functions.

Key Features

  • CODESYS provided by Festo V2.3 programming and configuration
  • IEC 61131-3 programming languages plus CFC
  • 400 MHz processor with 32 MB Flash and 32 MB RAM
  • 4 MB user-program memory; 30 kB remanent and 8 MB global data memory
  • Electrically isolated nine-pin Sub-D CAN interface, 125–1000 kbit/s selectable rates
  • Eight-pin RJ45 Ethernet at 10/100 Mbit/s
  • TCP/IP, EasyIP and Modbus TCP Ethernet protocols
  • Electric-drive motion functions and 31 total axes listed
  • Channel/module diagnostics, diagnostic memory and local RUN/STOP control
  • 155 g product weight, nominal 24 V DC supply and IP65/IP67 protection

Combine local CODESYS control, CPX diagnostics and CAN-connected drive functions with a 10/100 Mbit/s Ethernet interface in one control block.

Technical Specification Matrix

ParameterValue
ProtocolCODESYS Level 2; EasyIP; Modbus TCP; TCP/IP
Physical Weight (kg)0.155
Ambient temperature-5 °C...50 °C
Storage temperature-20 °C...70 °C
Relative air humidity95%; Non-condensing
Degree of protectionIP65; IP67
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Note on materialsRoHS compliant
Material housingReinforced PA; Makrolon®
LED display, product-specificERR: PLC run-time error; M: Modify/force enabled; PL: Load supply; PS: Electronics supply, sensor supply; RUN: PLC status; SF: System errors; STOP: PLC status
LED display, bus-specificTP: Link/Traffic
Device-specific diagnosticsChannel-oriented and module-oriented diagnostics; Undervoltage/short circuit of modules; Diagnostics memory
Operator controlsDIL switch for CAN termination; Rotary switch for RUN/STOP
IP address settingDHCP; Via CODESYS; Via MMI
Fieldbus interfaceCAN bus
Field bus interface, connection systemPlug; Sub-D; 9-pin
Field bus interface, electrical isolationYes
Field bus interface, transmission rate125, 250, 500, 800, 1000 kbit/s; Can be set using software
Ethernet interfaceRJ45 (socket, 8-pin)
Ethernet, number1
Ethernet, supported protocolsTCP/IP, EasyIP, Modbus TCP
Ethernet, plug connectorRJ45; Bushing; 8-pin
Ethernet, data transmission rate10/100 Mbit/s
ParameterisationCODESYS V2.3
Configuration supportCODESYS V2.3
Additional functionsDiagnostic functions; Motion functions for electric drives
CPU data32 MB Flash; 32 MB RAM; 400 MHz processor
Control-InterfaceCAN bus
Nominal operating voltage DC24 V
Nominal DC operating voltage, load voltageWithout pneumatics: 18 ... 30V; 24 V; With pneumatics type midi/maxi: 21.6 ... 26.4 V; With pneumatics type CPA: 20.4 ... 26.4 V; With pneumatics type MPA: 18 ... 30 V
Intern power consumption nominal operating voltageTyp. 85 mA
Power failure bridging10 ms
Programming, operating languageDE, EN
Programming languageTo IEC 61131-3; LDR; IL; ST; FBD; AS; Additionally CFC
Programming, support for file handlingYes
Programming softwareCODESYS provided by Festo V2.3
Program memory4 MB user program
Processing timeApprox. 200 µs/1 k instruction
Function modulesRead CPX module diagnostics; CPX diagnostic status; Copy CPX diagnostic trace; And others
Flag30 kB remanent data; 8 MB global data memory; CODESYS variable concept
Total number of axes31
Dimensions L x W x H (cm)10.7 x 5 x 5.5

Industrial Applications

1. Local Sequencing of a CPX Machine Station

A machine station needs local program logic to coordinate its pneumatic and electrical steps. The CPX control block supports IEC 61131-3 languages and CFC through Festo CODESYS V2.3, with 4 MB user-program memory and a 400 MHz processor. Local RUN/STOP control and program-status LEDs provide the documented operating interface for managing that station program.

Problem Solved

A programmable control block places the station sequence in the CPX assembly, providing documented program memory, supported languages and local operating controls for the machine logic.

CODESYS V2.3 4 MB user program 400 MHz processor

2. Electric-Drive Motion within a Pneumatic Station

A station combines pneumatic tooling with electric-drive movements and needs a controller that includes motion functions. This block lists motion functions for electric drives and a CAN control interface, with an electrically isolated nine-pin Sub-D connection. Software-selectable CAN transmission rates provide the network setting options, while the listed total of 31 axes describes the manufacturer's system quantity rather than a guaranteed motion-cycle rate.

Problem Solved

Documented motion functions and a CAN control interface support integrating electric-drive commands into the station controller alongside the surrounding pneumatic sequence and CPX functions.

Motion functions Isolated CAN interface 31 axes listed

3. Networked Diagnosis of Station Faults

A maintenance system needs to identify CPX module or channel faults rather than receive only a generic station-stop indication. The controller provides channel- and module-oriented diagnostics, diagnostic memory and functions for reading module diagnostics and copying a diagnostic trace. Its Ethernet interface supports Modbus TCP, TCP/IP and EasyIP, providing documented communication options for a programmed diagnostic-data exchange with the surrounding system.

Problem Solved

Detailed module diagnostics and stored trace access provide fault information within the controller, while supported Ethernet protocols supply communication options for exposing that information through the application.

Channel/module diagnostics Diagnostic memory Modbus TCP
Select your currency