Sale!

Festo 151007 Pneumatic Valve, 5/2 Bistable, ISO Size 1

Original price was: USD 76.96.Current price is: USD 66.82.

Pneumatically actuated ISO 5599-1 valve with 1200 l/min nominal flow, 2–16 bar control pressure, reversible flow and 6 ms reversal time.

SKU Festo-151007 Category
Festo Directional Control Valves

Festo J-5/2-D-1-C Pneumatic Valve

BrandFesto
Model IdentifierJ-5/2-D-1-C
Official Part Number151007

Technical Overview

The Festo J-5/2-D-1-C is a pneumatically actuated 5/2-way bistable valve using ISO 5599-1 size 1 sub-base connections. Its soft-sealed piston gate design provides 1200 l/min standard nominal flow, reversible flow and a −0.9 to 16 bar working-pressure range. Pneumatic control pressure is specified separately at 2–16 bar, with a 6 ms switching reversal time and no manual override. The 42 mm construction width and 43 mm mounting grid pitch define partial installation geometry. The 290 g die-cast aluminium valve mounts on a sub-base or through holes, with HNBR/NBR seals and −10 to 60 °C ambient and media limits.

ISO 5599-1 size 1 pneumatic 5/2 bistable valve with 1200 l/min nominal flow, reversible flow and 6 ms reversal time.

Key Features

  • 5/2-way bistable function with pneumatic actuation
  • ISO 5599-1 size 1 sub-base interface; ISO code 101
  • 1200 l/min standard nominal flow to DIN 1343
  • −0.9 to 16 bar working pressure; 2–16 bar pneumatic control pressure
  • 6 ms switching reversal time
  • Reversible flow and throttleable exhaust
  • 42 mm construction width, 43 mm mounting grid pitch and 8 mm nominal size
  • No manual override; sub-base or through-hole mounting
  • 290 g product weight with die-cast aluminium housing and HNBR/NBR seals
  • Any mounting position and −10 to 60 °C ambient/media range

Route two pneumatic working directions through an ISO size 1 bistable valve with air-signal actuation and 1200 l/min nominal flow.

Technical Specification Matrix

ParameterValue
Valve function5/2-way, bistable
Type of actuationPneumatic
Construction width42 mm
Standard nominal flow rate (standardised to DIN 1343)1200 l/min
pneumatic working portSub-base size 1 to ISO 5599-1; G1/4
Operating pressure-0.09 MPa...1.6 MPa; -0.9 bar...16 bar
DesignPiston gate valve
Nominal size8 mm
Mounting grid pitch43 mm
Exhaust-air functionCan be throttled
Sealing principleSoft
Mounting positionAny
Conforms to standardISO 5599-1
Manual overrideNone
ISO code101
Type of pilotingDirect
Flow directionReversible
lapOverlap
Pilot pressure0.2 MPa...1.6 MPa; 2 bar...16 bar
Switching time reversal6 ms
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN; 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-10 °C...60 °C
Sound pressure level85 dB(A)
Pilot mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature-10 °C...60 °C
Physical Weight (kg)0.29
Type of mountingOn sub-base; With through-hole
Pilot air port 12Sub-base size 1 to ISO 5599-1
Pilot air port 14Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 1Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 2Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 3Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 4Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 5Sub-base size 1 to ISO 5599-1
Note on materialsRoHS compliant
Material sealsHNBR; NBR
Material housingDie-cast aluminium

Industrial Applications

1. Air-Signal Reversal of a Transfer Cylinder

A machine uses pneumatic sequence signals to extend and retract a double-acting transfer cylinder. The 5/2-way bistable valve supplies the two directional routing states, with separate control connections at ports 12 and 14 through its ISO size 1 sub-base. Its 1200 l/min nominal flow and 2–16 bar control-pressure range characterize the switching component for the transfer circuit.

Problem Solved

Pneumatic actuation converts the sequence air signals into two working-flow directions, providing cylinder reversal through a documented ISO sub-base valve without a local electrical coil.

5/2 bistable Pneumatic actuation ISO size 1

2. Pneumatic Open/Close Command for a Gripper

A handling fixture operates a double-acting gripper from an air-based control sequence. The valve's two positions provide the corresponding working-port routing, and its bistable function defines the selected directional state. ISO 5599-1 size 1 connections and sub-base mounting provide the installation interface, while throttleable exhaust permits the surrounding circuit to incorporate exhaust metering for the gripper movement.

Problem Solved

Two directional valve states provide the gripper's opening and closing commands, with pneumatic actuation and a standard sub-base interface supporting the fixture's air-control arrangement.

Two directional states Throttleable exhaust Sub-base mounting

3. Directional Commands for a Reversible Air Motor

A suitable reversible pneumatic motor needs alternating air-routing commands for a winding or positioning mechanism. The 5/2 valve offers two directional states with reversible flow and a documented 6 ms reversal time. Those are component characteristics for developing the pneumatic sequence; the motor load, tubing and exhaust arrangement determine actual acceleration, run-down and reversal behavior at the mechanism.

Problem Solved

The pneumatic directional valve provides two air-routing commands for the motor circuit, with documented flow reversibility and switching time for coordinating the selected operating direction.

Reversible flow 6 ms reversal 1200 l/min nominal
Select your currency